Farmer Rock
just a fella' without a 10mm socket
did you jam the screwdriver completely through both sides of the filter? I know it's a stupid question, but going through one side will just rip the filter up.
Rock
So what did you do with your truck today?
- Thread starter GOOSE
- Start date
Rock
Laine D
Full Access Member
Yes sir, and it ripped still. Crazy
Is the penatration at top or bottom of the filter? I have had a issue with a same size filter on a cat before and had to stabe it a few times at the top get it to turn.
Laine D
Full Access Member
I started at the middle because that’s the only place I could reach it when I had the engine in the truck. Then once it was out I tried at the top. Still couldn’t get it. I think I’m just going to swap oil cooler headers. I have the stuff to re seal it anyways. Super weird, I’ve never had an issue until I used this other brand filter
Bakersk896
Registered User
Anyone snapped a leaf spring at the wrap? Happened to me today while I was installing a rear shackle flip kit. Looks like new springs are gonna be going in
Added broken leaf spring hanger to my list of truck needs but the kids and I were doing vinyl cutting this afternoon and they made and helped with this. Stickers make you go faster!
You must be registered for see images attach
Farmer Rock
just a fella' without a 10mm socket
I didn't do too much to the trucks today since I'm still waiting on parts, but I did get to install the new fsv and E pump. The fsv is the $50 "amazon special".
The E pump is a new holley red. I am upgrading from a smaller holley pump but will be keeping the old one behind the seat as a spare. Originally I planned on making a single bracket to mount the fsv, water separator, and pump, but do to the parking break cable it would have to hang to low. I just kept the fsv in the original location. The water separator will be on the right side of the pump once I figure out how to mount it
It's nowhere near as low as it looks, just the angle. I think U bolts are the only answer
Rock
You must be registered for see images attach
The E pump is a new holley red. I am upgrading from a smaller holley pump but will be keeping the old one behind the seat as a spare. Originally I planned on making a single bracket to mount the fsv, water separator, and pump, but do to the parking break cable it would have to hang to low. I just kept the fsv in the original location. The water separator will be on the right side of the pump once I figure out how to mount it
You must be registered for see images attach
It's nowhere near as low as it looks, just the angle. I think U bolts are the only answer
You must be registered for see images attach
Rock
Farmer Rock
just a fella' without a 10mm socket
Wow, that's nuts. It sounds like you have the engine out now, so how about a 3ft pipe wrench?
Rock
KYBricksandBulls
Registered User
Well, I didnt do it today...but a few days ago I used my IDI to pull home an 81 flareside I found for 600 bucks. Has 4x4, 460 big block and c6. Hell, I just wanted it for the rear fenders and bed.
Not I have 2 bullnose 4x4 flaresides.
Not I have 2 bullnose 4x4 flaresides.
You must be registered for see images attach
Laine D
Full Access Member
I don’t have one lol
Laine D
Full Access Member
That might work.How about a one foot pipe wrench and a cheater bar?
Found the crack in my cowl and painted/sealed the area. Nice wet April had my driver door sill area full of water. Be good to have it dry now!
You must be registered for see images attach
Did a muffler delete on the dually today.
Original muffler packed with soot. Has to weigh 50# or more.
Don't pick on my fence wire, it's only temporary
Have to go haul a truck next weekend and would like to free up a little bit of power if at all possible, we'll see!
Original muffler packed with soot. Has to weigh 50# or more.
You must be registered for see images attach
You must be registered for see images attach
Don't pick on my fence wire, it's only temporary
Have to go haul a truck next weekend and would like to free up a little bit of power if at all possible, we'll see!
Laine D
Full Access Member
Did a muffler delete on the dually today.
Original muffler packed with soot. Has to weigh 50# or more.
You must be registered for see images attach
You must be registered for see images attach
Don't pick on my fence wire, it's only temporary
Have to go haul a truck next weekend and would like to free up a little bit of power if at all possible, we'll see!
There’s nothing I love more than glass packs screaming at me on the freeway
