Chad241993
Registered User
Truggy Update, since I haven't been on here in awhile, been a hell of a fun build.
Lets see if I can remember what all I've done since the last post.
Re-did front suspension geometry, lowered front 5" and rear 3".
Full Hydro Steering with high steer knuckles.
Finished the interior.
Regeared the axels and added a locker in the front, rear is welded.
Changed up the cage.
Added air compressor, jack and tool box.
Weld on bead locks.
Heavy duty skid plates.
PolyCarbonate Windshield
Broke 3 drive shafts, one pinion, two windshields, tweaked the cab bad enough the rear window popped out, and rolled it twice.
Its a good time.
Lets see if I can remember what all I've done since the last post.
Re-did front suspension geometry, lowered front 5" and rear 3".
Full Hydro Steering with high steer knuckles.
Finished the interior.
Regeared the axels and added a locker in the front, rear is welded.
Changed up the cage.
Added air compressor, jack and tool box.
Weld on bead locks.
Heavy duty skid plates.
PolyCarbonate Windshield
Broke 3 drive shafts, one pinion, two windshields, tweaked the cab bad enough the rear window popped out, and rolled it twice.
Its a good time.
You must be registered for see images attach
You must be registered for see images attach