I need some help here. And didn’t want to post in 911 cause truck still runs. But long story short I replaced the key cylinder in my 1990 f250 and put my collumn all back together and it was working great. All except my right rear blinker won’t work. The other 3 will. So after checking the bulb and my harness connections I decided something wasn’t right in the collumn. So I take the wheel off again and make sure everything is right and it seems it is. But when I go to start it with the key. Which it was doing just an hour before. It won’t start. It initiates the glow plugs and everything. Turns over by the key very strong just like it should but the motor won’t run. So I go outside and turn it over by the silinoid on the fender and it cranks right up like normal. So it will run when I start it outside the truck. But won’t start off the key. Any body know what the crap is going on? Don’t mind hillbillying it for a while. It don’t bother me. But need to get this fixed