icanfixall
Official GMM hand model
When I go to start my truck it takes about 5 seconds of cranking to start... No ruff running or smoke either. This is not the morm for me... Usually I start by the first 1/4 to 1/2 turn of the motor. The glow cycle has not changed at all. Its the solid state system... No pushbutton. My entire fuel system is dry... Thanks are full and the filter housing it tight. I have 4 lbs on the system when running or cranking. Thats the Holley red pump. I'm missing something... Just can't find it. I just installed new BB code injector and a new return line system. The moose pump is working fine too. All I have done to the fuel system is turn down the fuel. I'm surgically clean when I do this. White plastic surgical gloves... Brake clean on the cover before I remove it. Then brake clean on the 5/32 allen wrench before I place it into the pump. I don't wipe it dry but do blow on it till I see it drying. No spit either... The cover gets cleaned with brake clean and not touched with anything. Just air drys. Then it gets back together.... Can a return line leaking down draw down the fuel side of the injectors.... Maybe the return line drop in the tanks has fallen off and its creating a suction on the system darwing fuel back into the tanks.... I'm at a loss....