I looked at some threads and pictures of the TYMAR intake (I'm referring to the actual TYMAR product not any DIY version) that's popular with the 7.3L Power Stroke crowd, and I eventually ended up calling the owner himself, Dale Isley and chatting with him. Long story short I ordered two Donaldson B085011 air filters and a filter mounting clamp from TYMAR and should see it on Tuesday. My number one priority when building this air filter system is filtration and performance second. This combined with a junk yard Power Stroke intake tube and some pieces I put together from frozen boost.com to both adapt from the compressor inlet of 2.75" OD to a 4" intake tube which is the outlet ID of the filter and to bent that intake up a little to clear the injection lines. So, I've got the mental picture, and I'm waiting for all the pieces to show. Every time I change something I create another problem and have to reengineer something else. It's a vicious cycle.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Not finished, but you get the idea.
I got a NAPA (WIX) coolant filter(4019) head and a coolant filter(4070). I still need to get a couple of T's, some more hose, and some clamps to finish that.
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
I know it's not installed. So, why am I showing you pictures?