oregon96psd
Full Access Member
hi guys, i recently bought a 84 6.9l 4x4. the previous owner decided that he would cut all the old glow plug wires out of the harness and just run a individual wire to each glow plug from the solenoid. im wanting to convert it to the solid state deal but am curious if i extended what was left of the cut off pieces if it would work with the rinky **** controller or if the resistance would be off to much for it to work. i read on here that a new engine harness could be as much as $600 from ford? if so ill drive this to the crusher myself before payin that. any help on this would be greatly appreciated.