icanfixall
Official GMM hand model
Yes, thats right. The shop knurled my new heads exhaust guides to "tighten them up.... The shop owner and I talked in depth about what kind of guides they would be installing because we felt the new heads were just a little sloppy. When I was there today dropping off my crank and pistons for rebalancing they said I could take the heads. When I asked what kind of guides did they install the answer was "I think he just knurled the exhaust and the intake was ok". I almost messed myself but I kept my cool. I told the owner at no time did we ever talk about knurling and that I would never accept that. We had way too much dialog on using several differant types of guide material. So, here I am still waiting for the right thing to be done. Further talking with the owner revealed the worker acted on his own and thought knurling was the most cost effective way to go on this. Geez.... Can a guy get a break here. I also found out that they DO NOT have the correct freeze plug installation tool so they wont be doing that for me either. I may just go down there tomorrow and watch them. I sure hope they don't mill the heads or set the valves too deep. Something more to loose sleep over.