Intercooler design question

[Agnem]

you read while I was editing. Boy your fast. I don't need them overnight. Let me post pics to be sure before you ship to the house.

 

[Darrin Tosh]

Sounds good I have your address

 

[Darrin Tosh]

Are a couple of those 90's?

Yes, Here is a pic of the 3 different elbows, there are 2 each:

 

[typ4]

I have used the CX racing stuff on the truck and a complete IC kit on the sandrail they do some pretty nice, reasonably priced stuff..

You do know I was kidding about the 6500rpm, 30 psi.??? right??

 

[Dsl_Dog_Treat]

Here is what I have, Ron is giving you a call and if you work it out, I can ship it out to you today overnight, Probably be $40.00 or so for shipping.

Man those look sweet!

 

[tractorman86]

I have used the CX racing stuff on the truck and a complete IC kit on the sandrail they do some pretty nice, reasonably priced stuff..

do they do custom bends or just a set few? i need an oddball pipe for another project i'm doing, do you have a phone # for them or should i just find them on evilbay and ask through there?

 

[Agnem]

Then I suspect our kits are identical with the pipe diameter being the only difference. My kit also includes the blue boots and lots of clamps. It all came pretty well packed in chinese cardboard with white foam covers. The pipes are very light I thought, but the bends are very smooth and they have those nice anti-blow off rings on them. E-bay is where I got mine.

 

[Dsl_Dog_Treat]

Mel, if it's just a pipe diameter difference, then we're good!

 

[Darrin Tosh]

I got them boxed up and Click and Shipped to go out tomorrow morning.

 

[zpd307]

are you using that hypermax style intercooler from crx. i thought about using that one also.......when and if that time comes.

 

[Agnem]

Here is what I will pack up tonight.

You must be registered for see images

 

[Agnem]

Do you guys have that big U piece? If not, I might hang onto this one. As this kit has 9, and yours has 8 other matching pieces, and I will definitely need the 180.

 

[typ4]

do they do custom bends or just a set few? i need an oddball pipe for another project i'm doing, do you have a phone # for them or should i just find them on evilbay and ask through there?

just set kits, pm them thru evilbay.

 

[Dsl_Dog_Treat]

Do you guys have that big U piece? If not, I might hang onto this one. As this kit has 9, and yours has 8 other matching pieces, and I will definitely need the 180.

That's fine.



So did the stuffed animal make the night?

Pm headed your way.

 

[Agnem]

So did the stuffed animal make the night?

He got replaced, but was allowed to watch.