IDIT piston pin bushing

[jwsfarrier]

I have a set of turbo rods I will be fitting up with new pistons and would like to change out the all the bushings. Everything I come across is for NA application. I know the OEM turbo pistons have a bigger pin diameter but none of the sites I searched differentiated between the NA and Turbo applications. If someone in our great pool of knowledge could turn me on to a source or part number it would be much appreciated. Cheers!

 

[riphip]

https://www.fordpartsgiant.com/part...on-connecting-rod-related-parts.html?PNC=6207

 

[jwsfarrier]

Great, thanks a bunch!

 

[Randy Bush]

You do realize that when installing new bushing a machine shop will have to size them to the pins. I would take the rods to a machine shop and have the check both ends of the rods to see if they are out of specs before just spending the money on new.

 

[jwsfarrier]

Thanks for the heads up. I don't know the history of the rods as I bought them used,and not all the rods are from one motor. Good idea to have them spec'd out to make sure though

 

[typ4]

The guys that are surfacing the heads can do the rods and get the bushings

 

[jwsfarrier]

Perfecto! I will just hand those rods over to them. I'll PM you. Thanks Russ!