Found On Ebay

[icanfixall]

http://cgi.ebay.com/ebaymotors/Ford...ies?hash=item27ab48225f&_trksid=p4506.c0.m245. Maybe this will help out someone.... Looks like they were bolted to a block.... Then removed....Don't know why someone would do that. These heads don't have the inconel exhaust valves but they will handle a turbo. I ran my original motor with what International used for valves in 89 without ever having a valve problem... The Banks turbo couldn't hurt the stock valves.....

 

[dukedrummer89]

too bad they arent 6.9 heads

 

[6 Nebraska IDIs]

I'd buy em but don't need them. We bought the last set of heads you found on ebay Gary. lol What I do need is a junk 6.9 head so I can break in my ARP studs.

 

[icanfixall]

Sean... Any 7.3 head installed on a 6.9 will work for the stud torqueing that needed. Even a cracked head will work. Find a machine shop that rebuilds these heads and ask to borrow a shot to hell 6.9 or 7.3 head. When done just take it back... A broken head is only worth scrap value. That can't cost much if the shop wont let you "borrow" a head.

 

[zpd307]

i saw those too. reserve not met and $200.00 to ship.......