Brass caps!!!

[IDIoit]

cheap caps still have casting flash on the ID's and need to be thoroughly inspected before install, and filed.
itll cut a viton easily.

i admit. the average joe will never need more than plastic caps.
but i strive to not be average.
and my name aint Joe.

 

[Dregs Garage]

@IDIoit sorry I didn’t get them done yet... metal compression with 1/4” female pipe so the original brass barb by 1/4” pipe can be reused!

simple yet effective

You must be registered for see images attach

 

[IDIoit]

@IDIoit sorry I didn’t get them done yet... metal compression with 1/4” female pipe so the original brass barb by 1/4” pipe can be reused!

simple yet effective

You must be registered for see images attach

to match the caps.

 

[Cubey]

cheap caps still have casting flash on the ID's and need to be thoroughly inspected before install, and filed.
itll cut a viton easily.

Maybe the o'reilly caps were slightly better quality in early 2017? I looked at and felt the insides but didn't see the need to file them any (unless I have forgotten), and none of the o-rings have leaked. The IP inlet olive has been the only issue on there in cold weather.

 

[IDIoit]

Maybe the o'reilly caps were slightly better quality in early 2017? I looked at and felt the insides but didn't see the need to file them any (unless I have forgotten), and none of the o-rings have leaked. The IP inlet olive has been the only issue on there in cold weather.

i absolutely hate those olives. i delete them all.
usually with AN lines

You must be registered for see images attach

 

[1mouse3]

i absolutely hate those olives. i delete them all.
usually with AN lines

an/jic or sae fittings along with some push-loc hose can go a long way.

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

looked better before I went and streched out the feed to fun one filter.

You must be registered for see images attach

 

[RSchanz]

In the meantime:

You must be registered for see images attach

 

[1mouse3]

You must be registered for see images attach

What is the life span of this foil in adverse conditions?

 

[IDIoit]

gotta say, these badboys are nice.
thanks for the awesome caps @Dregs Garage
pictures really dont do these justice.

You must be registered for see images attach

You must be registered for see images attach

 

[IDIoit]

boinoinoing

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[asmith]

Looking sharp!! What are the black caps on top? And where did you get the valve covers? Those are sweet too.


Sent from my iPhone using Tapatalk

 

[IDIoit]

Looking sharp!! What are the black caps on top? And where did you get the valve covers? Those are sweet too.


Sent from my iPhone using Tapatalk

had them made. custom job, that rodeo was a nightmare, a year of waiting, and i must say, im not even mad.
those caps on top are just there to keep junk out of injectors until i get my lines on.
they are actually honda lugnuts lol

 

[lotzagoodstuff]

Those fabricated valve covers are beautiful.

 

[lotzagoodstuff]

MadMax called and asked for those lug nuts back

 

[1mouse3]

MadMax called and asked for those lug nuts back

So thats where I got my wheels from.

You must be registered for see images attach

You must be registered for see images attach

This is with the correct front tires and center caps, a more current one is unavailable. Sorry, a current close up would involve cleaning them so its not now.

You must be registered for see images attach