Brass caps!!!

[Selahdoor]

Yes!!!

xc_hide_links_from_guests_guests_error_hide_media

I hope I can afford them and that he has what I need when I can get them ordered.

I'd use one single barb. One tee 3 barb. Two corner two barbs, and 4 straight through two barbs.

 

[Farmer Rock]

I would buy them without a doubt.Sign me up!


Rock

 

[Va_Mike]

Very interested in these. I just did the plastic caps I was I would have had these instead.

 

[nitroguy]

@Dregs Garage nice work man!! Interested for sure. And I just realized you're practically my neighbor, only 8 hours away in Billings. Might be worth a road trip.

 

[homelessduck]

I've been wanting a set of these or aluminum ones for years . Every once in awhile we get teased with another set , but no one actually sells the damn things!

 

[Selahdoor]

If I had a lathe capable of turning these things out, I'd gladly stand there all day, and turn them out.

 

[Stu Bailey]

Damn, super nice video! Quality work I would definitely buy a set!

 

[Clb]

Did not play the vid...
Nice stuff,
Still I wonder how the inj. And cap Design shortcommings are axderssed by a metalic copy?

Fwiw
The 93 has near 30k on the set I installed back ? when ?

If o.p. markets them sales wil come in fo shure..

 

[IDIBRONCO]

And I just realized you're practically my neighbor, only 8 hours away

Well, in Montana, Alaska, and Texas, that's just around the corner.

 

[Cubey]

Maybe I'm just lucky, but the probably original caps (especially on my RV) were fine. I replaced them on the truck "just in case" but didn't bother on the RV since I had spare new viton o-rings from the truck. I kept the truck's old caps as spares, and used an L one on the RV where it had tiny plastic tee and a dead end cap, because the tee broke when taking it apart.

Edit: Actually I think I put the truck's old caps on the RV because I used the old caps complete with the old hoses still attached as templates for cutting new hoses and attached them to the truck's old caps. Then kept the RV's old caps as spares. I might have reused one or two of the RV's original caps too. It's been almost 2 years so my memory is fuzzy.


Before:

You must be registered for see images attach

After:

You must be registered for see images attach

 

[lotzagoodstuff]

Only one thing left to question:

ballpark pricing for these jewels?

 

[Selahdoor]

I didn't realize that @Dregs Garage was a member here, when I posted that.

I should have known.

In fact, I probably subscribed to his channel BECAUSE I saw one of his vids from here.

Getting old and forgetful, is not easy.

Regardless, it has occurred to me that maybe I 'stole his thunder', because he intended to introduce this himself here, with that video.

If so, I am sorry. It was not intentional that way. I was just excited to see that someone was making the brass caps.

Any questions about price and availability should be addressed to him.

 

[IDIoit]

he told me $260 a set plus shipping.
not bad at all.
cheaper than me running them on my lathe @ shoprate.
ill be buying a few sets myself when ready.
not a fan of the plastic caps, even tho a good kit with vitons do work well.

 

[miles1400]

@IDIoit is that $260 for caps, new lines, and clamps all together or is it $260 for just the caps

 

[IDIoit]

@IDIoit is that $260 for caps, new lines, and clamps all together or is it $260 for just the caps

that would be a question for the guy that makes them, i assume its just for the caps