ATS downpipe?

[idiTravelAll]

I got a local buyer for my ATS kit and we're realizing I don't have the downpipe that connects to the 90* bend off the hotside as pictured.

We agreed to 550, after realizing the downpipe is missing I offered to let it go for 500. Are there any cost effective solutions for a downpipe with these?

You must be registered for see images attach

 

[IDIoit]

take a 3" v-band clamp kit off e-bay, cut the elbow, and weld a clamp flange on. then make your own downpipe.

 

[Eli]

I hope it's allowed to mention here, but R&D modifies these to use a Diamond Eye PSD exhaust: http://www.idiperformance.com/store/p36/93/94_Factory_Turbo_IDIT_3"_Downpipe_upgrade.html

Eli

 

[idiTravelAll]

I hope it's allowed to mention here, but R&D modifies these to use a Diamond Eye PSD exhaust: http://www.idiperformance.com/store/p36/93/94_Factory_Turbo_IDIT_3"_Downpipe_upgrade.html

Eli

Thank you, I'll be sure to mention it.. probably means I'll be knocking more cash off though..

 

[idiTravelAll]

take a 3" v-band clamp kit off e-bay, cut the elbow, and weld a clamp flange on. then make your own downpipe.

Thank you, I'll mention that also!

 

[idiTravelAll]

Sidenote, I drove my first IDI today.. 87 6.9 and LOVE it even in NA form!

 

[The FNG]

You may be able to get one still. I think I ordered one from Banks a few years back. $120 to my door if I remember. It took some digging to get the part number for it, but once I found it, they sent it right out.

 

[idiTravelAll]

You may be able to get one still. I think I ordered one from Banks a few years back. $120 to my door if I remember. It took some digging to get the part number for it, but once I found it, they sent it right out.

I've read ATS no longer supports the IDI kits but that would be sweet, I'll give them a call tomorrow.

 

[The FNG]

Banks, not ATS. But it fits the ATS kit.

 

[The FNG]

This *may* be it p/n: 52103

 

[catbird7]

take a 3" v-band clamp kit off e-bay, cut the elbow, and weld a clamp flange on. then make your own downpipe.

You must be registered for see images attach

 

[IDIoit]

You must be registered for see images attach

I wouldn't grind it tho.
that elbow gets some heat to it.

 

[catbird7]

Had to grind my big birdshit welds so the clamp would fit! No probs so far.