Search results

  1. smokin69

    DT466E Surging

    I know this isn't the right section but I figured I'd try it, I'm currently working on a DT466E in a 2003 4300 International and it has a miss/surging issue at 2000 rpm to 2300 rpm, but only when it's over 200 degrees and under heavy throttle, like climbing a hill. It feels like you shut the key...
  2. smokin69

    Gauge cluster pin-out

    I'm working on a 95 F800 and I all the dealers I talk to don't have a listing that goes back far enough to find a schematic for the gauge cluster plug. The interior is the same as a 80-86 F-series and looks exactly like my 6.9's, I was wondering if anyone would happen to have one? any help would...
  3. smokin69

    New topper

    BTW you should've seen the look on my moms face when she read it :P
  4. smokin69

    Dash Lights out need some Help!

    Check fuses.
  5. smokin69

    New topper

    Well the nice thing is it takes maybe 4 minutes to take it off.... 6-9/16 bolts and it's off. Believe me, we did it while buzzed last saturday so we could cruise in my truck at the car show. Left it on the back of a short box chevy lol.
  6. smokin69

    New topper

    Well I picked up this topper for 50 bucks from my cousin, it's all fiberglass and even came with the clamps, he had it on an early 90's F150 w/ 300,5 speed, 4x4 but sold the truck and had no use for the topper. The only thing I really have to do to it is get a new handle because the old one on...
  7. smokin69

    Leveling

    x2 I'm so happy bout that on my truck, when it comes time to level it out all i gotta do is adjust the link from the pitman arm to the tie rod to make my steering wheel straight :P
  8. smokin69

    Be careful.

    Well after cracking a pair of prescription safety glasses in half at work, I decided to get one of these: http://buy1.snapon.com/catalog/item.asp?P65=&tool=shop&item_ID=88423&group_ID=24166&store=snapon-store&dir=catalog They're a heck of a lot cheaper than new glass lenses all the time and I...
  9. smokin69

    Interesting Discussion....Ford training.

    Been that way for a long time.
  10. smokin69

    Be careful.

    Well while at work today, a guy was taking a spring hanger off of one of the International shit trucks we have and couldn't get a nut out of the socket on the 3/4 gun and stuck his finger in to pull it out and slipped his finger on the trigger.... left really nice threads on the guys finger and...
  11. smokin69

    Tow report

    No idea on the grade % but some where maybe in the 4.5-5 % range, I know they weren't quite to 7.5%, as there's only one hill around me that's marked and they weren't as steep as it. As for length, a mile to maybe 3 miles for the longest one. I know with my old IP I would have to keep it booted...
  12. smokin69

    How to???

    roll pin I'm guessing with a small punch
  13. smokin69

    Tow report

    Well after getting my new IP and injectors in and changing all the fluids and filters, I hauled my first load with my F350 and it sure suprised me the difference it made. I was hauling a 20 foot all steel stock trailer with a 2000 pound Percheron in it. With my old IP and injectors, I could...
  14. smokin69

    traction Bars

    It's all about how the arms are design and attatch. A LOT of Bronco guys run traction bars off road and never have a problem. The key is setting it up to be the right length and angle, and using a shackle in the front and having two fixed points in the rear, the arm is almost a really long...
  15. smokin69

    Interior question

    Hmm I know I got buckets out of a 94 Bronco for my 93 Supercab...... Same color, center console everything was exactly the same so I'm pretty dang sure they are.
  16. smokin69

    Interior question

    Look for a four door with buckets and the jump seat, they'll bolt in. Super Cabs and Broncos share the same bolt pattern.
  17. smokin69

    Water To Air Inter cooler

    Buy something like a transmission cooler and a little electric pump and plumb it like that with a small reservoir, returning from the res with the cooler. The nice thing about it like that is if you want some extra performance dump some ice into the reservoir and it will drop intake temps even...
  18. smokin69

    need for a 6.9 and 4 speed

    Is it an NP208 or a newer BW13-56 T-case?
  19. smokin69

    need for a 6.9 and 4 speed

    Is it a 4x4 trans? If so how much?
  20. smokin69

    RDT questions

    Semi's still run RDT's, just rubber hose run down under the truck with a 45 degree slash towards the rear.
  21. smokin69

    Want to regear

    4.10 and thirty fives will be right about at stock tire size with 3.55's
  22. smokin69

    lift kit or leveling kit

    That's what I love about my old old body style Ford, I've had 35's on it stock with a little rub and 33" super swampers with zero rubbing. Square wheel wells rule.
  23. smokin69

    Adjustment help

    Hmm I'll have to try that, the VRV is almost new so we'll have to see, my old one broke. Thanks
  24. smokin69

    Adjustment help

    I've checked the lines and they seem good, I had the VRV off when I was switching pumps and misplaced one of the screws and left it off when I went to go pick another up and the truck ran good and shifted really quick under light throttle but I could tell it was slipping if I rolled into it...
  25. smokin69

    Adjustment help

    Well I just got my a new IP and injectors put in it this week, only took me about 3 1/2 hours total working time to do it all, anyways I need some help figuring out how to adjust the governer speed, as it's right at 3300 rpm right now and I'd like to be more 35-3600 as the extra few rpms really...

Latest posts

Forum statistics

Threads
91,287
Posts
1,129,810
Members
24,104
Latest member
Wheelsrollin

Members online

Total: 641 (members: 6, guests: 635)

Share this page

Top