Search results

  1. G

    Holley Red!!!

    What year and model truck do you have? 94 F350 4x4 Crewcab 6" lift Promar long block holley red!! 355/60/20 tires 20x12 allum wheels.
  2. G

    Holley Red!!!

    Big block plate worked great with a little grind of the plate on the top,but it could have been the china plate!!Went to a local (race shop) to get a fuel pump block off plate for a big block chev, they have none,and want to know if a small block plate will fit?????????????? I had to leave and...
  3. G

    Holley Red!!!

    Thanks a big block plate would be nice i'll try it.I live just south of I/4 between exits 32&38.
  4. G

    Holley Red!!!

    Putting a red on today and yes in Fla. it is also cold this morning(33w/light rain)call me a wuss!I know it should go as close to the tank or tanks as possible.But that would be in front of the splitter valve for the tanks correct?And is there a co. that makes a block of plate to go where the...
  5. G

    Tire size

    I run 355/60/20 tires on 20x12 wheels with 4.10 gears pull anything i want with power to spare!!!(when the injectors were hitting good!!)
  6. G

    Stanadyne vs Delphi injectors

    So you are saying even with the turbo the BB injectors would do the best job but would the DB2-5069 pump have to be set to those BB injectors for proper timing? And if the BB injectors would work with my pump without mods would the timing stay the same?
  7. G

    Stanadyne vs Delphi injectors

    I have a 94 w/factory turbo the stanadyne #781535 is what i pulled out of the old engine the delphi box # is 6760301 is this same as g code? and how is the BB code better for a turbo engine than the G code?Agnem rebuild these or?
  8. G

    Stanadyne vs Delphi injectors

    Put in a new set of Delphi injectors w/promar long block 2 yrs ago (11k)3 mo ago started missing at start up then rough idle even after warm up.No fuel leaks or air in system any input would be great!! and sorry its been so long sense ive been here.
  9. G

    FUEL LEAK AT THE IP AGAIN....

    IH carries them after 3 weeks of looking for a air problem that was it 2 sleeves as they call them at IH @ the tune of just .81 cents each!!!!!!Air is gone!!!!!!!! And there was no fuel leaking!!!!!!!! just air getting in the system!!!!!!!
  10. G

    AIR

    Still seems to be getting air in the fuel system so i put clear line between the top of the IP to #2 return cup and from the top of the filter housing to the #1 return cup NO AIR. So then i put a clear line in between the manual fuel pump and the filter housing and when you start the engine cold...
  11. G

    IP SCREEN

    That's why we ask the people who know!! A mirror and light sound like a great idea,so just remove the input line then remove the nut that is behind it?Then i will be able to see the screen?Sounds easy enough also still seem to be getting air in the fuel system so i put clear line between the top...
  12. G

    IP SCREEN

    Simply,where is it located?
  13. G

    IDI Repower Options

    PROMAR :hail Just put one of there long blocks in and it runs super,smooth as silk!!Ordered it on Monday told them i needed it by next weekend,they shipped the same week thurs. and i had it in fla on the following monday sitting in my garage at home.All 8 cyl. bored and sleeved looked...
  14. G

    Diesel Rip Offs

    Did not buy anything,Mr. Williams would never return my call!!Called 4 times left messages and phone #, 5th time the girl asked if i wanted to leave a message and i told her very nicely that i would not be needing to leave a 5th message if 4 did not work i doubt 5 would either.I will give my...
  15. G

    IDI REBUILD

    Have a promar long block sitting in the garage as we speak,going in this weekend.It looks great very good people and super quick shipping,all 8 cyl bored and sleeved.;Sweet Let you know how it goes
  16. G

    94'FD1060,FD1460

    The reason i am asking about the #'s i found a book these engines but do not know what they are???:confused:
  17. G

    94'FD1060,FD1460

    MAN,Ithought i would get a quick answer on this one!!!:confused:
  18. G

    94'FD1060,FD1460

    What are these engines? 7.3 idi,power stroke or something else?are these ford engine #s?:dunno
  19. G

    94 IDI w/turbo service manual

    Does anyone have one of these or is there somewhere that this can be bought?Putting in new long block next weekend and need to know all toque info on everything from front cover to rear cover.Cleaning parts today and will check info later TKS
  20. G

    Sensors

    it was black and my next question is should this line be replaced or will it be fine and seal ok?:dunno
  21. G

    Sensors

    94 idi w/ factory turbo was wondering what are the 3 sensors on the front of the engine,1is pass. side in head top side?,1 is on top of block by #2 cyl,and 1 is in dri side head on the lower side by cooler? and also when removing the main fuel feed line(from filter to i pump)there was some sort...
  22. G

    compression tester

    OK give me hell, bought mine on e-bay 21.50 +15.00 shipping has more adapters and works fine.
  23. G

    Turbo downpipe fitting help?!

    Called banks this morning to see about the down pipe and it was a no go,they said they had 2 that were spoken for but they could sell me a upgrade(100 hp, lower egt, higher torque,quicker spool,wastegate equiped) $3285.00 HOLLY COW.no need to change anything just change turbo & comes w/new down...
  24. G

    what the hell

    BARN YARD CAMO!!!LOL
  25. G

    what the hell

    COW,yes COW how crazy do you have to be? Got me beat!!

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,115
Members
24,118
Latest member
Grizzly Wrecker

Members online

Total: 578 (members: 6, guests: 572)

Share this page

Top