Search results

  1. BigRigTech

    ALMOST NEW 7.3 POWERSTROKE CLUTCH DISC.

    This is a stock clutch disc for a 7.3 Powerstroke with a dual mass flywheel. Excellent condition. $40 plus shipping from postal code B3T-2C8.
  2. BigRigTech

    A bunch of IDI engine parts. Reman IP, reman injectors and more.

    A bunch of IDI engine parts. UPDATED: prices are posted. COD in the mail is what I'll do, I repowered my 92 F350 with a Powerstroke. I have a reman 7.3 injection pump and injectors that worked great when removed on Oct 20/13. The injectors might have 10,000km on them since I bought them from...
  3. BigRigTech

    WANTED: TUNER FOR A 94-97 OBS 7.3L POWESTROKE

    Anyone have a used tuner/programmer they want to sell for an early powerstroke? :sly PM me.
  4. BigRigTech

    Powerstroke swap has begun

    I finally tore into my 92 F350 4x4 dually today, I managed to get the gas rad support and old IDI out in good time. Lots of detail work to be done before I can even think about installing the new PSD. I can't wait to see her running again with PSD power.:sly
  5. BigRigTech

    Gearing up for my PSD swap.

    Ok, I finished the 97 F350 4x4 PSD truck I was working on last week for a decent payday.:sly. I will be stripping the donor 95 F250 4x4 in a week or so. I bought a MINT diesel rad support from Arizona, an almost new 13" LUK clutch kit, a nice saddle mount fuel tank to make it easier to fill up...
  6. BigRigTech

    93 F350 4x4 crew cab parts mule

    I scored this 93 F350 4x4 for $650...Parts mule to help pay for my PSD swap. The D60 front axle being the glory hole...LOL....It runs but needs injectors badly. Pretty rough body and frame but it should yield a tidy profit from the drivetrain stuff. I won't be pulling the engine, I'm just going...
  7. BigRigTech

    PSD swap in my 92.

    Been a while since I posted here.....:D....I'm junking a 98 E350 for the 7.3 that has 201,000KM - runs very well for $250:sly. I'm putting it in my 92 F350 cab and chassis 4x4 to get some more power over my 7.3 IDI. The truck weigh's 9000lbs with my 9ft plow on the nose. I took the cab off the...
  8. BigRigTech

    Instrument cluster fuse keeps popping

    Anyone ever have this issue with a 92-97? It used to happen when I was plowing and hit something hard but it's worse this last week....LOL....Blows the fuse right away now. I haven't had time to look at it yet so I figured I would check to see if there are any common theme's.:rolleyes:....My...
  9. BigRigTech

    Tire stem extensions.

    Has anyone here with a dually found a decent tire stem extension that fits well and actually lets you check the air in the rear tires?...I find both rims to be a PITA when it comes to checking the tire pressures....I've bought a couple things locally with no luck.:dunno....I was going to call...
  10. BigRigTech

    2006 F350 6.0L for $1500

    I bought a used Ryder truck yesterday for $1500....153,000KM.....2wd, reg cab long box. The 6.0 needs manifold gaskets and possibly a headgasket/EGR cooler as it's using coolant. It also needs some work for MVI but the truck is well worth fixing....I'm probably going to part the entire truck out...
  11. BigRigTech

    6.5 GM fan on an IDI clutch

    Seeing as my truck was built with a 460 I have the small rad support and finding a decent deep support is near impossible around here so I'm not going that route. I had a early style short/wide diesel rad until last winter when it blew while plowing snow...In a mad rush we put in a mint 460 rad...
  12. BigRigTech

    Y-pipe pipe OD size

    Anyone know the diameter of the stock y-pipe at the manifold???....My clamps that hold it to the manifold are both rusted and starting to split so I need to replace them with some 2pc split types and I forgot to measure the pipe OD when I came in from the shop tonight.:mad:....Just prepping the...
  13. BigRigTech

    Rustproofing idea.

    You know, sometimes I even surprise myself with my creative idea’s....:D:rotflmao......After watching/helping my old man struggle to undercoat his 04 Ranger 4x4 today I decided I need a bigger/faster undercoating apparatus....I was looking around online when yet another stroke of brilliance...
  14. BigRigTech

    A deal too good to pass up.

    I saw a 2004 F150 supercab XLT 2wd for sale on Kijiji, $4000 obo....4.6, auto with 103,000km on it.....Excellent body, bad frame was the deal...It was 5 minutes from my home so I went for a look....Just as stated in the ad - the body was great, the frame was toast...beyond repair.:dunno....I...
  15. BigRigTech

    Veg kit install

    I just finished installing a Golden Fuel WVO kit on a 1991 Dodge W250....He took it home tonight, it took some time to get my head around the plumbing and etc but it works really well...Two Hot-Fox coolant fed heaters in a 135 gallon fuel tank mounted in the bed and a trick 3 valve setup on the...
  16. BigRigTech

    Fan diameter

    Was there only one fan diameter for the IDI's?? I have a 460 rad in my 92 but the fan is a touch to big for the fan 460 shroud....I'd like to use it if possible or I will have to make a custom shroud....I only have a gasser rad support so there is no room for a deep diesel rad...I have a brand...
  17. BigRigTech

    LUK release bearing quality???

    Off topic for this forum but the clutch in my new 2001 cobra didn't feel right so I ordered a new LUK stock replacement kit for tomorrow morning....It comes with the pilot and release bearings....Should I use them or get the Ford bearings I ordered originally?....I know LUK makes a decent clutch...
  18. BigRigTech

    The Caper and the IDI.

    So my m-inlaw goes to a local tourism/trade/artist show today and buy's this huge friggin rod iron fire pit made by a blacksmith from Sydney, Cape Breton Island which is about a good 5-6hr drive from my place on the other end of the province...The blacksmith and his wife came to deliver it...
  19. BigRigTech

    Cummins swap questions

    I have a few questions for those of you with Cummins 12V's in your Fords. This is for my 92 F350 C&C 4x4 dump truck. I'm stripping the 92 D350 donor truck right now. 1: exhaust manifold - leave it as Dodge installed it or flip it over to point the turbo up? I also have a commerical 5 ton...
  20. BigRigTech

    460 rad with an IDI.

    If they say bad luck comes in 3’s I must be good to go now....One Blown head gasket, One bent angle cylinder on the plow in the last storm and tonight it shit the radiator at about 5:30pm when I just started plowing...My buddy fixed me up with a mint 460 BBF rad and we made it work for tonight...
  21. BigRigTech

    6.9 head gasket kit part numbers.

    Anyone have part number for a head gasket kit for my 87 6.9???? It got hot the other day while driving to work (plow was on and there was a strong head wind) and apparently it took on the pass side gasket (pissing on the floor)-cuss....So now I'm into 2 gaskets and a water pump ASAP so I can get...
  22. BigRigTech

    Another cheap Cummins

    I bought this 92 D350 this morning for $1200....Runs great too....290,000KM on it. I'm going to swap it into my 92 and keep my p-pumped Cummins for a future build as planned. The trans is rebuilt and has hardly any miles since it was done. I think there is enough stuff left on the old Dodge to...
  23. BigRigTech

    Factory 1994 7.3 Turbo engine...video.

    Here is the new mill to replace my lazy 6.9....I got it on a trade deal with a buddy of mine....I will owe him some parts and or labour in the future on one of his 3 trucks. This one has 364,000KM, 4wd ZF trans....Seems to run good enough but it will need some attention before it goes in the...
  24. BigRigTech

    Factory 94 turbo IDI.

    If all goes according to the current plan I will have a 94 F250 4x4 with a 7.3T and ZF sitting in my yard Saturday afternoon. I hope to fire it up before I rape it for the IDI and ZF.:Dcookoo....If it can be freshened up for a reasonable price I will swap it for the oil chugging 6.9 in my F350...
  25. BigRigTech

    I hit pay dirt bigtime today!

    I hit pay dirt bigtime again!...New pics. I posted an ad on Kijiji looking for a 5.9 Cummins vibration damper and fuel filter head for my 12V project so I could fire up the engine on the shop floor....Looky what I found today in the scrap metal bin at buddy's shop.:eek:.....The best part - wait...

Latest posts

Forum statistics

Threads
91,310
Posts
1,130,135
Members
24,120
Latest member
SixFourShanks08

Members online

Total: 636 (members: 10, guests: 626)

Share this page

Top