Josh_Deal
Registered User
Just recently got the Ats 088 installed and have a question about egt's. My injection pump died shortly before doing the turbo install so i used the one from the parts truck that the turbo was removed from. I am not sure if the pump was ever turned up. I just got my isspro pyro installed and wanted to know what i should be seeing temp wise from a stock vs. turned up pump unloaded. As of this evening, at idle i am running about 250-300 degrees. Unloaded, i see around 600 degrees with hard acceleration, and 3-450 under light acceleration. On the highway under hard acceleration it is running as high as 800 and as low as 600 under light acceleration. Rpms at these temps range from 2000-2500. Outside temps today are around 70 degrees. I would like to turn the pump up per the ats 088 instructions but dont want to mess with it if its already been done. Any help would be greatly appreciated.
Thanks
Thanks