93fordturbo
Full Access Member
Heres my project. Like the PO says, "its a work in progress"
You must be registered for see images attach
lets see those sweet IDI's
- Thread starter benton
- Start date
benton
Country boy
great lookin truck!!!! i love the old bull nose fords!
my85ford
Full Access Member
well got mine running today and washed it and took some better pics today!
heres the pics
heres the pics
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
burtcheca
farmer/cabinetmaker
gonecrazyi
Full Access Member
What's the paint code on that brown?
benton its in the works now bieleve it or not currently im in the process of freeing up the wheel well space to get a manifold made
i will have to cut some of the wheel well but it will be replaced with heat tape covered metal
i plan to start out around 12 psi and dont go higher but it will get up to 17 pretty quick but with a 6.9 easily found in my local yard for cheap i plan to rebuild it and run low comp and some good stuff and then swap into the truck
then freshen up the stroker motor and put it in something cool
but all but the turbo is long term
i will have to cut some of the wheel well but it will be replaced with heat tape covered metal
i plan to start out around 12 psi and dont go higher but it will get up to 17 pretty quick but with a 6.9 easily found in my local yard for cheap i plan to rebuild it and run low comp and some good stuff and then swap into the truck
then freshen up the stroker motor and put it in something cool
but all but the turbo is long term
alienturtle
Human
about 1 1/2 tons of scrap metal i haul for the high school. 
You must be registered for see images attach
You must be registered for see images attach
benton its in the works now bieleve it or not currently im in the process of freeing up the wheel well space to get a manifold made
i will have to cut some of the wheel well but it will be replaced with heat tape covered metal
i plan to start out around 12 psi and dont go higher but it will get up to 17 pretty quick but with a 6.9 easily found in my local yard for cheap i plan to rebuild it and run low comp and some good stuff and then swap into the truck
then freshen up the stroker motor and put it in something cool
but all but the turbo is long term
i will have to cut some of the wheel well but it will be replaced with heat tape covered metal
i plan to start out around 12 psi and dont go higher but it will get up to 17 pretty quick but with a 6.9 easily found in my local yard for cheap i plan to rebuild it and run low comp and some good stuff and then swap into the truck
then freshen up the stroker motor and put it in something cool
but all but the turbo is long term
benton
Country boy
i want to see pics when you get started building it!!!!
heres so far what i have
the turbo its self holset hx35 21cm housing 17psi wg
engine bay with some stuff moved around
im doing a g31 setup on the drivers side to make tons of room
also i have all the piping im going to start non intercooled for now then add one when i can afford one or find one cheap
bumper has that big flat spot in center it will be cut out and replaced with expanded metal for air intake for the intercooler
then i will do a cowel induction scoop to feed it
You must be registered for see images attach
the turbo its self holset hx35 21cm housing 17psi wg
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
engine bay with some stuff moved around
im doing a g31 setup on the drivers side to make tons of room
also i have all the piping im going to start non intercooled for now then add one when i can afford one or find one cheap
You must be registered for see images attach
bumper has that big flat spot in center it will be cut out and replaced with expanded metal for air intake for the intercooler
then i will do a cowel induction scoop to feed it
to make the room i removed my power inverter and will relocate it to the toolbox
also i swapped heater boxes for the non ac unit
and moved the rest of the crap on that fenderwell along with moving the wiring harness
hopefully tomorrow ill mock up my tubing its supposed to be like 80 out ill take pics of that too
also i swapped heater boxes for the non ac unit
and moved the rest of the crap on that fenderwell along with moving the wiring harness
hopefully tomorrow ill mock up my tubing its supposed to be like 80 out ill take pics of that too
benton
Country boy
sounds good buddy keep me up dated with lots of pics as you do the work!
http://s571.photobucket.com/home/hotrod220257/index#!cpZZ2QQtppZZ28
everything goes up there so ya just keep on me i falloff and do other things when it gets boring with thinking and all
everything goes up there so ya just keep on me i falloff and do other things when it gets boring with thinking and all
The day I bought it off my dad:
Last fall in the backyard:
Lately it's found itself hooked to the twin axle a little bit, I need to find an excuse to hook up to the tri-axle and a real load, hasn't actually towed anything heavy since the turbo install, and I'm itching to see how it does.
You must be registered for see images attach
Last fall in the backyard:
You must be registered for see images attach
Lately it's found itself hooked to the twin axle a little bit, I need to find an excuse to hook up to the tri-axle and a real load, hasn't actually towed anything heavy since the turbo install, and I'm itching to see how it does.
phazertwo
Die Summer DIE!
This thread makes me want a CC with a cummins in it REAL BAD..
Here is my oil burner for the time being. Hauling my buddys "crawler to be" when he moved.
I plan to leave the truck itself completely stock. It pulls trailers, and that is it! I do however dream of rebuilding the engine, studding the heads, and making 20lbs of boost!
Most likely it will get A IC, moose pump, and misters at some point, but until then
PZ
Here is my oil burner for the time being. Hauling my buddys "crawler to be" when he moved.
You must be registered for see images attach
I plan to leave the truck itself completely stock. It pulls trailers, and that is it! I do however dream of rebuilding the engine, studding the heads, and making 20lbs of boost!
Most likely it will get A IC, moose pump, and misters at some point, but until then
PZ
Similar threads
