WANTED: 4x4, ZF-5, reg cab, long bed rear driveshaft.

[Oog]

As long as it's straight and not too out of balance.

Thanks!

 

[Iowa 73]

I have one, make me an offer. ZIP is 52804.

 

[Oog]

Shfifty dolhars? If you don't mind, can you get me a measurement from center to center of u-joint?

 

[Iowa 73]

I'll measure it tomorrow...

 

[Iowa 73]

measurement from center to center of u-joint?

'88 ZF shaft and '91 ZF shaft, ~ 51.5"

 

[Oog]

Wait a second here. 4x4, zf, one piece shafts? Mine measures out at 62.5"

 

[Oog]

Yea, disregard that last message, I have no idea where I got 62.5, and promptly missed out on a local driveshaft for scrap prices. Anyway, mine's 51.5" long. How would you like to get paid?

 

[Oog]

Actually, do you need any zf parts?

 

[Iowa 73]

Actually, do you need any zf parts?

I have two good ZFs and one with a cracked rear case, so I'm good.
For some reason the F-250 shafts are one inch shorter than the F-350 shaft. I have two shafts from '88 F-250s and they are both 51.5", while the shaft from my '91 F-350 is 52.5".
I will sell one of the F-250 shafts, I'll have to check on shipping for you.

 

[Oog]

Bought one locally.

 

[Oog]

Bump. Need one again.

 

[hce]

If the transfer case has a slip yoke I have one. 51.5 inches cc with 1350 joints

You must be registered for see images attach