pictures of oil cooler heads?

[rhkcommander]

I am missing at least one bolt, havent gotten it off yet it started leaking when running looks like 3 bolts per oil header?
Using the search here I found this : Front header has 3/8 screws (9/16" wrench or socket), rear header has 5/16 screws (1/2" wrench or socket). From knuckledragger.

 

[icanfixall]

Nope... Each header has 4 bolts holding it to the block... Time to clean off some of the oil and dirt.

 

[rhkcommander]

yeah I gotta wipe it down.. dirt, sand, mud.. 2" long bolts do the trick?

 

[Knuckledragger]

I have one in the shop and will check tomorrow, but I know there are four on the rear, cannot remember if there are three or four in front. The screw sizes are correct.

 

[Dsl_Dog_Treat]

The rear cooler mount has a couple different length bolts. The front bolts are all the same length.

 

[rhkcommander]

been trying a 3/8 bolt that was 2" long but snubbed it to 1 3/4, fker wont thread...

 

[rhkcommander]

just for future reference, the bolt thread pitch is 16. and inch and a half works in length.

And the 'local' business did me wrong while lowes did my right

 

[leftcoastjeff]

this may help

You must be registered for see images attach

4 each side, IIRC. specific sizes, ya know....

LCjeff

PS NO sealant of any kind, or so I've been told.

 

[rhkcommander]

i take it the right mount is near the firewall and the left one near the grill?

I'll crawl under there again and feel around, maybe its time to use a mirror

looks like the one bolt i replaced got the leak sealed