ptwcruiser
Registered User
I need help. I got a 2x4 transmission from a motorhome to replace my 7.3idi f350 trans that is burned up. It has an external drum brake on the back end of it and a ujoint right on the back. I need the standard 2x4 slip yoke tail. I figured it was still the long tailshaft not the short 4x4 and I would need to swap the housings and be good. When I took off the housing the tailshaft came out with the housing. From everything I've read, a clip should hold that shaft in and be one of the last parts you can remove when dissasembling it. I've got some pictures. I don't recognize the back cover of the transmission either. Has anyone pulled one of these apart before?
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach