ip inlet thread type

[redneckaggie]

I am trying to make a an flexible line for the fuel feed past the filter to the ip. I would like to know what threads are on the fuel inlet for the ip, I know that it is a compression fitting that the hard line connects to but I am talking about the other side of that adapter, it appears to be a straight thread with some sort of compression ring but I am trying to find a an fitting that will thread in there.


Thanks in advance.

 

[89Laredo]

:search:

AN and JIC are interchangeble for our purposes.

http://www.oilburners.net/forums/sh...-inlet-fitting&p=781285&viewfull=1#post781285

 

[FarmerFrank]

5/15 o-ring fitting to #6 JIC is what I use.

 

[War Wagon]

It's 5/16 ORB or O-ring boss.

 

[OLDBULL8]

Just get the whole shebange from Agnem, he has them all made up last I heard. PM him.

Shebange, Jewish for everything you need.

 

[Agnem]

We do sell what we call our "Moose feed line" which is a very high quality feed line assembly with everything you need. You want to be very careful what post-filter materials you use. Just using regular fuel line can be detrimental if you don't replace it yearly. With todays fuels, various types of rubber can break down and put crap in your pump. Our feed line is of a variety that will not degrade like traditional parts house hose will do. That's why it costs a bit. Prices are on our web site. http://conestogadiesel.com or if that's hard for you to spell or remember, use http://moosepump.com