snaponprofile
Full Access Member
Well folks Im changing my intake manifold gasket. It came in the mail today and one of the ports was slightly bent. So I straightened it out a little, should I be worried? I will probably put a VERY light coat of RTV copper on the face of the one that was bent right before installation.
I drilled multiple holes in the baffle and installed the banks grommet with copper RTV prior to installation of the gasket.
Is there anything I should know?
I drilled multiple holes in the baffle and installed the banks grommet with copper RTV prior to installation of the gasket.
Is there anything I should know?