F
Flyinb44
Latest activity Postings About
-
-
FThat's also normal for these engines. The were designed with a large ring gap so they do have a lot of blow by.
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.Agree, I don't think that's out of the norm for a healthy motor. I think at 70 I'm turning 2600-2700 RPM with 4:10 gears and stock size...
-
FThere's nothing wrong with that. The old hot rodders adage is 10 PSI per 1000 RPM. I seriously doubt that your were seeing more than...
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.Status update, I got the truck out for a drive today. Oil pressure never hit 50 despite traveling at highway speeds. Temp stuck just...
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.I actually lubed the o ring with some light weight grease before installing. I haven’t checked the mating surface with a straight edge...
-
FDumb thoughts from a dumb guy: Maybe you forgot to wet the rubber gasket on the filter with oil? Worst case, what about using a thin...
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.Thank you. The interesting aspect to this is the truck was largely dry until I drove around Chicago through heavy construction areas...
-
Fwow you weren't kidding about the leak. Mine leaks, but nothing like that, it is more of a slow seep. I can get it to stop by really...
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.Temp got up to just shy of 180 and pressure settled. This is where I shut it down. This is the amount of oil it leaked from running and...
-
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.That’s the typical flow I get from the filter. Any thoughts? Thanks
-
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.Sorry it took a bit but finally got the gauges wrapped up this evening. Looks like idle oil pressure is at between 35-40 psi. That’s...
-
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.Does anybody know what psi the Oil Pressure Relief valve assembly is calibrated to open at?
-
FIf you still have the factory line it should be a steel line inside of a shield that kinda looks like a spring. I thought mine was...
-
FFlyinb44 replied to the thread Oil Leaking Down Filter.So I was able to get some time and put a wrench on the valve cover bolts. None were loose but I put another 1/8 to 1/4 turn on the...
-
-
Loading…
-
Loading…
