Lonesome7.3
CSA
I am planning to convert my old Dodge D200 to an electronic ignition. But for right now I have to get the truck back on the road so I can get to work. The truck all of a sudden died and would not start. When I pulled the cap there was a lot of moisture. It needed it anyway so I went ahead and tuned the truck up with new plugs, wires, cap, and rotor. But the truck still would not start and the plugs were not getting any spark. I looked it up and everything pointed to the points being bad. So, I cleaned the cam and filed the points to a smooth solid contact. I tried to buy a new condenser but there were a lot of issues with that so I said to hell with it. Further research stated I need a dwell meter to make it all work. I just need this truck to run for now. Is there another way I can do this without buying an expensive dwell meter I am only going to use once?