Head gasket saga - update

[zigg]

Well, I got it pretty much all back together. I just put on the injection pump and injectors this evening with all new o-rings and copper washers.

Other than one of the ARP nuts stripping threads on the stud when torquing, it's gone quite smoothly. I'm just taking my time with everything.

Not much left but to add some oil, place all the wiring onto the fittings, and spin that sucker over. Pro'ly in the next day or two.

Then comes the paranoia about watching the bubbles in the cooant overflow.

I swear, if there's bubbles in there I'm gonna just

I'll let you guys know...

Zigg

 

[reklund]

Get yourself one of these if you don't already have one: http://www.amazon.com/Lisle-22150-Spill-Free-Funnel/dp/B0002SR6WK

You'll thank yourself later- I use one every day at work, and it is worth its weight in gold!

Ryan

 

[tonkadoctor]

Get yourself one of these if you don't already have one: http://www.amazon.com/Lisle-22150-Spill-Free-Funnel/dp/B0002SR6WK

You'll thank yourself later- I use one every day at work, and it is worth its weight in gold!

Ryan

That would take half the fun out of guessing how good your aim was

Good Luck Zigg, Murphy will prolly be visiting me while I work on my tranny tomorrow so you should be OK. Got my fingers and toes crossed for ya.

 

[Agnem]

Good luck Zigg! I'm crossing my fingers and toes for you.

 

[dsblack]

Come on..... let it be good.... Got my fingers crossed as well. Gotta work!

Doug

 

[icanfixall]

All I can say is you have lost your magnatism for bad luck. It has gone back into the netherland and is looking for a place to manafest itself. Probably in my area. I thought I saw some dark clouds over my area this morning.