glow plug *****

[metalminded]

is there a replacement boot for the glow plugs? mine are almost all cracked and crumbly.

side note, i replaced all my glow plugs and all the old ones(factory motorcraft plugs) came out very easily. i do not know how many miles they had on them however

 

[6.9poweredscout]

go to autozone and get the pack of the blue "bullet" connectors.

http://www.maneywire.com/images/Vinyl-Insulated Bullet.jpg

 

[lotzagoodstuff]

+1 on the bullet connector fix, I like to solder them on and finish it off with some shrink tubing (the good stuff with the meltable inner wall ) over the whole thing.

My truck has been normally aspirated its whole life, so the entire harness isn't that crispy, but a complete harness from one of the "IDI parts specialists" might be a good seller if somebody created one

 

[icanfixall]

Most of mine are missing too but the bare clips are not going to touch any metal so I don't worry bout them. Replacing them as posted is what many have done with good results. Glad they came out easily.

 

[metalminded]

ohh good idea, i have some of these some where... http://www.elecdirect.com/product/5b569793-59df-4a23-ba26-30988dd4358e.aspx