First, thanks to all who have given me advice for the IP R&R on my 1994 IDI 7.3. Because of this advice, there were really no problems taking it out or going back in with the rebuilt pump . The engine started up after a few tries . It is running rough . It could be way out of time even though I matched the marks but it seems more like it is missing . I have cracked the lines a found 4 cylinders (1,2,3,7) not to have any significant RPM drop. The injectors are brand new Delphi code E equivs . This engine ran fine on all 8 cyls until I had IP and injector problems .
My plan is to check the bad cylinders with by swaping an injector from a good cylinder a testing by cracking lines . Here I go again ..... . Any suggestions are greatly appreciated . - Thanks
My plan is to check the bad cylinders with by swaping an injector from a good cylinder a testing by cracking lines . Here I go again ..... . Any suggestions are greatly appreciated . - Thanks
Last edited: