AcIdBuRn02ZTS
Full Access Member
Well.. we've been putting it off for several months but it was finally time to relocate the WMO system to the new house.
We ended up deciding not to heat the 'fuge drum for now... may change that later though.
Anyways.. pictures..
2 Totes indoors out of the elements..
Finished drum will be here.... may move it.. not sure if I like it there or not.
Everything re-plumbed using Gasoila thread sealer
Pump and motor mounted to the wall...
Pressure switches plumbed via 5k psi hyd. hose
Running Vid..
https://www.youtube.com/watch?v=45rIu_DQk70
Working on wiring in the pressure switches soon but currently mixing up a batch as we ran dry last week... plus we are running out of storage space.. 2 full totes inside and 1 full tote still at the old house plus a couple drums I still need to pick-up from work...
Also planning on adding a site glass (clear tube) to the drum to make it easier to fill since we chose to use a closed top drum...
This setup has come a LONG way from the 2 micron spin on filter and gravity feed setup we started with.. still has a bit further to go though.
More to come!
-Chris
We ended up deciding not to heat the 'fuge drum for now... may change that later though.
Anyways.. pictures..
2 Totes indoors out of the elements..
You must be registered for see images attach
Finished drum will be here.... may move it.. not sure if I like it there or not.
You must be registered for see images attach
Everything re-plumbed using Gasoila thread sealer
You must be registered for see images attach
You must be registered for see images attach
Pump and motor mounted to the wall...
You must be registered for see images attach
Pressure switches plumbed via 5k psi hyd. hose
You must be registered for see images attach
Running Vid..
https://www.youtube.com/watch?v=45rIu_DQk70
Working on wiring in the pressure switches soon but currently mixing up a batch as we ran dry last week... plus we are running out of storage space.. 2 full totes inside and 1 full tote still at the old house plus a couple drums I still need to pick-up from work...
Also planning on adding a site glass (clear tube) to the drum to make it easier to fill since we chose to use a closed top drum...
This setup has come a LONG way from the 2 micron spin on filter and gravity feed setup we started with.. still has a bit further to go though.
More to come!
-Chris
Last edited: