chickenpot
Latest activity Postings About
-
-
So i can bolt a starter to a project motor -
Anyone have the part # for this HVAC switch? Not the blower switch but for the vacuum.
-
-
chickenpot replied to the thread Oil change without removing oil filter.The IDI is still going to $hit up synthetic oil as fast as conventional. And filters are going to have a minimum micron rating regardless
-
chickenpot replied to the thread Cheap ZD-9 Motorcraft plugs on Flea-Bay? Legit or sketchy?.Sketchy why mess with it just get them on rockauto
-
chickenpot replied to the thread Oil change without removing oil filter.i bought a few cases of those too before i realized the psd filters were almost as cheap. so if i ever use 40 psd filters ill start...
-
chickenpot replied to the thread Oil change without removing oil filter.6 for 10 is a pretty good deal
-
-
chickenpot replied to the thread Tips to diagnose squeaky belt or bearing component.I always threw baby powder on the belt to see if it was belt or pulley noise. If it quiets down it's a belt
-
chickenpot replied to the thread So what did you do with your truck today?.Same price as the Motorcraft on Rockauto. Today, I rigged the blower speed selector switch by taking it apart, cleaning all the...
-
chickenpot replied to the thread mechanical lift pump repairable?.i would consider switching back to mechanical pump if there was one that had serviceable valves and diaphragm
-
chickenpot replied to the thread Worn traction beam bushings?.thanks guys, first things first im gonna work on getting new pivot bushings and radius arm bushings installed
-
chickenpot replied to the thread Worn traction beam bushings?.yes i knew they were adjustable.. thought it was just the upper had the eccentric bolt and was adjusted by loosening the clamp and...
-
You should be able to look at the center pivot bushings. If the rubber is hanging out or the center bolt doesn't look to be in the...
-
Ball joints are tight yet, no slop. Wondering if this weird camber can be the result of the traction beam bushings wearing out...
-
-
chickenpot replied to the thread Possible to burn up a fuel shut off solenoid?.yes, from everything I've read, leaving the key on for extended period of time is what would likely kill the fss. ive decided to keep a...
-
chickenpot replied to the thread pump and injector cores?.Ill buy a set of stanadyne injector cores from you if you have them
-
-
Loading…
-
Loading…
