icanfixall
Official GMM hand model
Thank you Russ for throwing Cali into this picture. A member here made the psd injecter quote and another member here had this done on his companys psd. That quote was $5400.00 in the middle of this state. A town called Modesto. But no matter. To even think about replacing an injecter on any pad your clearing most of the parts on top of the negine because all the injecters and glow plugs are under the valve covers plus.. You need to drain the coolant because of the coolant running around the injecter sleeves. Then there is the high pressure oil in the common rail thru the heads. then all the electronics feeding the plugs and injecters has to get into the heads but how.. Well its a design that sends all the electrical power thru the valve cover gasket...
Thats right. Its a common crush area that fails and your dead in the water. Sure a cam senser is easy to replace but do you have in in the glove box. Now what about the throttle peddle switch.. Nope?? Now are you ever going to do any turbo work...
Not to worry. Ford makes a special cab pulling fixture to lift off the cab so you can reach the turbo.![Eek! :eek: :eek:](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Ask anyone that has a newer psd. I have seen the fixtures on ebay too. They grab the top of the doors and you lift off the cab. Nope.. Not a fun job. On some of the turbo applications on the idi its sometimes necessary to lift up the cab to remove a turbo with the down pipe stuck in the turbo. Thats not the norm but it has happened. So we recommend lifting the front of the cab and placing a 4x4 block in there to remove the stuck turbo parts. No matter what you say. Working on a psd is much more expensive than an idi. Now ask yourself.. Where can you buy new psd injecter and how much will they be. One set of psd injecters will buy 3 or 4 sets of idi injecters. And if you cheap out and buy the ebay fakea$$ rebuilts from Tenn you can buy almost 10 sets of them for the price on one psd set. Money talks here very loudly and clearly. I personally feel we drive the most economical diesel out there. I have plenty invested in my trans and my gv aux trans but I know I have the best for my money. I don't feel I will live long enough to wear out the trans or the GV. I'm very comfortable driving what I have and believe its going to get me there and back safely and doing it with great mpg. I got 18.9 mpg driving home from the 2009 rally in Kentucky doing 75 to 85 mph in double overdrive. My engine has the hp to pull those mpg with 3.55 gears all day long. At 85 mph you don't hear much engine sounds but you hear the air rushing by mostly.
![rotflmao :rotflmao :rotflmao](/styles/default/xenforo/smilies/rofl.gif)