It Turns out that my Snap-On dealer cannot get me a tool or at least this tool. I was quite angry when he told me. Hopefully I can get one some how in the future.
(kneeling here) could please have arrows, like in a drawing--showing the dimensions?? and a drawing?? of the end of the outer shell, how the chamfer, or bevel is. as this kornfuses me!!!! and does the bevel for the concave of the plug, in the outer shell, match the soft plug before its hammered?? when the center plunger is all the way thru the outer shell--how much distance between the bottom of the plunger--and the outside edge of the barrel with a straight edge across it? sometimes hard to put dimensions to a part without drawings--thanks from us all!!!!!!!!!!Hey Gary, Sorry, Forgot about measuring that critter, here's the dimensions
outer shell length 5"
inner shell length 4.956"
shell wall thickness 0.2475"
shell hole 0.993"
Shell outside diameter 1.5"
Plunger:
overall length 6"
length that goes through shell to shoulder 4.991"
Length of Striking head 1.009"
Width of chamfer around end of plunger 0.061" ~45 deg chamfer
Diameter of plunger 0.992"
Diameter of striking head 1.375"
Chamfer around striking head thickness 0.233" ~ 45 deg chamfer
That otta cover it
----------Robert
(kneeling here) could please have arrows, like in a drawing--showing the dimensions?? and a drawing?? of the end of the outer shell, how the chamfer, or bevel is. as this kornfuses me!!!! and does the bevel for the concave of the plug, in the outer shell, match the soft plug before its hammered?? when the center plunger is all the way thru the outer shell--how much distance between the bottom of the plunger--and the outside edge of the barrel with a straight edge across it? sometimes hard to put dimensions to a part without drawings--thanks from us all!!!!!!!!!!
yup, thats true, but like robert said. its the angle of the dangles that make it work properly----thats why i asked him for measurements-----That'd be soooo easy to make. Prolly cost a whopping $5.00 for materials
depends on what robert wants to do-- hes the one that spent the original money---If Robert would be willing to ship that thing. I could make one in an hour, or two. Then completely diagram it for anyone needing the measurements.
Speaking of the IP wrench. I got a complete 6.9/7.3 Rotunda Essential Service Set for $60.00 off'n eBay. That was before the rush for Ford specialty tools.
Like this one, 'cept it is complete
what piece is missing in the top tray???If Robert would be willing to ship that thing. I could make one in an hour, or two. Then completely diagram it for anyone needing the measurements.
Speaking of the IP wrench. I got a complete 6.9/7.3 Rotunda Essential Service Set for $60.00 off'n eBay. That was before the rush for Ford specialty tools.
Like this one, 'cept it is complete
If Robert would be willing to ship that thing. I could make one in an hour, or two. Then completely diagram it for anyone needing the measurements.
Speaking of the IP wrench. I got a complete 6.9/7.3 Rotunda Essential Service Set for $60.00 off'n eBay. That was before the rush for Ford specialty tools.
Like this one, 'cept it is complete