ATS 088 Turbo Kit

Status
Not open for further replies.

gonecrazyi

Full Access Member
Joined
Aug 27, 2008
Posts
3,270
Reaction score
3
Location
florida
I have an ATS 088 kit that came off of an 89 f350. I was told it had around 70k on it and seems to be tight. It has no in and out play and just a hair of up and down, but doesnt seem to contact the housing. The kit also comes with a boost and pyrometer gauge.

I have everything to install it but the grommit and the valve cover for the cdr.

750obo plus shipping.


Feel free to make offers, the last time I shipped one of these it was between 50-75 dollars.
 

Attachments

  • 2010-10-01_16-34-56_101.jpg
    2010-10-01_16-34-56_101.jpg
    722.2 KB · Views: 80
  • 2010-10-01_16-35-18_224.jpg
    2010-10-01_16-35-18_224.jpg
    472.7 KB · Views: 35
  • 2010-10-01_16-35-49_687.jpg
    2010-10-01_16-35-49_687.jpg
    517.5 KB · Views: 47
Last edited:

gonecrazyi

Full Access Member
Joined
Aug 27, 2008
Posts
3,270
Reaction score
3
Location
florida
Id really like to keep everything together. But as of right now it looks like I may end up putting it on my truck due to little interest.
 

93f250idi

strokin
Joined
Apr 18, 2010
Posts
2,855
Reaction score
1
Location
cadiz ky
whats the least you will take? the guy i sold my truck to wanted to turbo it so ill see if he's interested.
 

dakotajeep

Patrolling
Joined
Aug 28, 2007
Posts
1,187
Reaction score
1
Location
TN/ND
Wow, I am surprised this isnt gone yet. The economy isnt that bad....is it?

I think $650 is a deal.....

Thad
 

crashnzuk

Full Access Member
Joined
Jun 13, 2009
Posts
884
Reaction score
0
Location
West Sacramento CA
Doug Nash underdrive for C6

Hey all, I have an old Doug Nash under-drive with a 2wd C6 tailhousing I'd like to sell. This is an earlier version of the US Gear unit before the name change/buyout whatever happened. No electronics, but some of the wiring is still hooked to it. Seems to be in good shape, I have looked inside it and all looked fine. I'd like $100 or trade for a stock 56 or 58mm HX35 compressor housing and wheel. Could be interested in other trades too, I have a 63 Studebaker Lark, a Jeep YJ, a Plymouth GTX, and an old minibike that needs and engine so something that may work for one of those.

I really don't want to ship, so local pick-up is required.

It is best to call me as I only check here a few times a day.
Travis
916-812-0854
 

dyoung14

Is getting worn out
Joined
Jan 2, 2009
Posts
6,128
Reaction score
3
Location
spencer,tn
Pictures usaully help stuff sell, that way people see what they would actually be getting instead of buying something blind;Really
 

The Warden

MiB Impersonator
Supporting Member
Joined
Jan 12, 2005
Posts
7,356
Reaction score
35
Location
Fog Bless Pacifica (CA)
Hey all, I have an old Doug Nash under-drive with a 2wd C6 tailhousing I'd like to sell. This is an earlier version of the US Gear unit before the name change/buyout whatever happened. No electronics, but some of the wiring is still hooked to it. Seems to be in good shape, I have looked inside it and all looked fine. I'd like $100 or trade for a stock 56 or 58mm HX35 compressor housing and wheel. Could be interested in other trades too, I have a 63 Studebaker Lark, a Jeep YJ, a Plymouth GTX, and an old minibike that needs and engine so something that may work for one of those.

I really don't want to ship, so local pick-up is required.

It is best to call me as I only check here a few times a day.
Travis
916-812-0854
Travis, did you mean to post this as the start of a new thread?

Just wondering, did you run this unit yourself? ...if the internals are (mostly) the same as on the OD unit and everything works properly, for $100, I may be interested in it for parts...
 
Status
Not open for further replies.

Latest posts

Forum statistics

Threads
91,305
Posts
1,130,019
Members
24,115
Latest member
Tyler9828

Members online

Top