Jcsheriff
Registered User
Ok all, got another project to get this truck ready to pass inspection. I have the usual issue with the headlight switch acting up. I removed the dash cover and pulled the assembly out. The connector had the loose burned wire. So I was searching for a write up on removing the original switch and installing illuminated toggle to operate auxiliary, parking and headlights. I couldn’t find one, you might ask why? I can only say that I like toggles and I don’t plan on giving up the truck, when she’s no longer road worthy she’ll work until I bury her on the ranch, lol.
so what I need help with is some sort of a pin out that tells me what’s what. I included a diagram of my connector that I drew from the angle of looking at it. Using the black wire with orange stripe as a power source, I used a jumper wire to probe each wire to see what powered up. The one with parentheses that have a question mark, I got nothing from when I applied power. I was hoping someone could help me out or may have had experience doing something like this.
thanks in advance
so what I need help with is some sort of a pin out that tells me what’s what. I included a diagram of my connector that I drew from the angle of looking at it. Using the black wire with orange stripe as a power source, I used a jumper wire to probe each wire to see what powered up. The one with parentheses that have a question mark, I got nothing from when I applied power. I was hoping someone could help me out or may have had experience doing something like this.
thanks in advance