Search results

  1. HS108

    Cooling system upgrade time

    I had originally planned on redoing the interior work this Fall, and I may still get to it, but my water pump got jealous and said me first, so he started leaking coolant lol I’ve been wanting to redo my cooling system, and replace my radiator as well, so it forced my hand. I went with the...
  2. HS108

    Factory Alcoa lug nuts

    I just switched to factory Alcoa’s from aftermarket ones, I’m Embarrassed I have to ask, but what style lug nuts do I use for the factory Alcoas with the caps I’ve found they are 9/16 - 18 with 7/8 /21mm hex But a lot of the open style nuts are 3/4 hex, seem too weak. Anyone got...
  3. HS108

    Installing new leafs on 94 F250 TTB

    I think its time for new leafs on my truck, from what I can tell they are the factory springs with an add a leaf under them. I have 225k miles and its a 30yr old truck, so think I got my money out of em. Im looking at springs on RockAuto, factory spring load is 3486. My question is.. I have a...
  4. HS108

    94 F250 Dana 50 ball joint question

    What is the torque spec and sequence for my ball joints, I have the Dana 50 Twin I beam axle, and once they are tighten to spec, I flush out the factory grease correct?? I know it seems dumb, but reading conflicting info Thanks
  5. HS108

    Dana 50 wheel bearing replacement, how in-depth should I get

    What started off as a simple brake job has turned into a full blown rebuild. I wanted to "just" replace the Pads, rotors, hoses, and calipers on my TTB dana 50, but it has turned into a whole production... Now im replacing the bearings and seals and repacking it all with fresh Red N Tacky (I...
  6. HS108

    Kent Moore J33300 timing kit questions

    Im getting back in the game, Ive had the truck for awhile just driving it here and there, and I need to start investing some time and TLC into it. I have tons of parts stock piled up, New RD-80 pump, BB injectors, guages, etc not doing any good on my shelf Question is, I had a lead on a...
  7. HS108

    Free - Factory Turbo K&N Filter

    I have a used filter for the factory turbo, I switched to paper for the time being as i plan to make a custom intake once I install an IC. The filter needs to be cleaned and oiled. Im out of product, so thats why I made the switch. Free, just pay shipping.
  8. HS108

    Hydroboost noise

    I just installed a used hydroboost set up in my truck, as well as a new steering box. I now have a constant "whirl/whine" that I can hear in the cab, and it increases with RPMS. It doesnt make any more or less noise when I turn, and Its not noticeable from outside the cab. The hydroboost...
  9. HS108

    Steering Gear Replacement Question

    Yesterday I swapped in a new Blue Top Steering gear box and converted to hydroboost (the write up in the Tech articles is amazing BTW) Everything went pretty smooth, on the hydroboost side of things. Unfortunately the Steering gear fought me, I marked everything in a line when I took my gear...
  10. HS108

    Hydro boost and steering box install questions

    I am in need of a new steering box, I can turn left but cannot turn right very well, so its time.I am going to order a new Blue Top steering box. I also have a hydroboost set up Ive been sitting on, I would like to finally install since I will have the area so open with the box out. I guess I...
  11. HS108

    WTB: Mirrors

    Im looking for a set of mirrors like shown in the picture. I just need the mirror part, have brackets. Let me know. Matt
  12. HS108

    Proper way to check oil level on 7.3 idi

    I just changed my oil in the truck, and I may have accidentally over filled it by a half quart or so . I normally just add the 11 Qts and call it good (I run the PSD filter) but I lost track of the jug I was on and poured most of it in. My question is this: A) What is the proper way to...
  13. HS108

    Dana 60 rebuild

    I bought a Dana 60 out of a 96 F350, my plan is to rebuild it and swap it in my truck. I however bought the axle in pieces, and now have to put it back together, which stinks because I don't know exactly how it came apart lol My first question is, how the heck to I separate the rotor off...
  14. HS108

    Ranch Hand OBS Bumper - 750

    I have for sale a brand new Ranch Hand bumper for the ford OBS series, this bumper is brand new and never installed. It does however have some minor damage on the front and drivers side to the powder coating from shipping. https://www.ranchhand.com/front-bumper-fbf921blr.html Im located in...
  15. HS108

    Help me locate this leak

    When replacing my turbo, I noticed a lot of oil all over the place. I took some pics from the bottom looking up where the downpipe would be. I notice a lot of oil on the motor on the passenger side of the motor, and a lot of gunk in the Valley pan as well, also pretty junked up in the pocket...
  16. HS108

    Project: BTB

    Project: BTB (before the baby) So I have been stocking up on parts for the truck since I got it. I never had to time to install any of them, as it was always something going on in life, Buying a house, wedding, etc etc. Now with a baby on the way, I know its really all over for spare time, so...
  17. HS108

    New Hitch Install Question

    Im installing a new Curt 15300 Class V hitch, as my old one was rusty and flaking off in big chunks, and I didnt like the thought of it letting go while towing. I bought a new Curt hitch, and when I go to line it up, the old holes dont fit the new holes. of course lol My question: Is it...
  18. HS108

    Clogged Orifice tube

    Found out why my AC wasn't working... I think the Accumulator went bad, and one of the desiccant bags let go based on the looks of it. Plus years of the store bought AC cans with stop leak.
  19. HS108

    Painting a rear bumper

    I bought a new bumper for the ford, but I need to repaint it, as the PO did a piss poor job at it. Its a solid steel bumper that has been spray painted, I just need to clean up the runs in the paint, and want to repaint with a nice spray paint. What should I do to get the bumper ready...
  20. HS108

    Can you use a Ford 6.0 intercooler

    I have a used one sitting around my garage, Ill never use it on my truck. Just pay the shipping and its yours. Few paint chips, but fins are straight and no leaks.
  21. HS108

    Lock button doesnt work any more??

    The other day I went to lock my truck when I was getting out, and nothing happened, hmmm I walk over to the passenger door, still nothing... The strange thing is both sides the unlock will work, but lock wont? What could be causing this?
  22. HS108

    E4OD shifting issues, Wont go into third

    So Im gonna start another E4OD thread, as if sadly there isnt enough of them. I am having an issue shifting into gears, but lets rewind about a month. Last month, a friend needed a fuse for something, I let him borrow a 10 amp fuse from my truck, I didnt have any extras, so I pulled what...
  23. HS108

    How cold does your AC blow?

    I charged my AC last summer with a can of R134a from the store, worked great AC started blowing cold, pretty sure down in the 40s for temps out of the middle vent. So this time I decided to add a can of stop leak in there while charging it, Got my low side up to 35psi with about 80 outside...
  24. HS108

    How to pull codes? Overdrive light blinking

    Ive tried searching, and looking on youtube on how to pull the codes, but Im getting conflicting information, and none of it seems to be working. So Ive decided to just make a thread and be done with it. Back story on why I need to pull codes Last week I Drove my truck about 50 miles to...
  25. HS108

    5th wheel style tailgate owners??

    I bought a used vented 5th wheel style tail gate at a local swap meet. Dont know much about it, it doesnt have a manufacturers tag on it. Picked it up cheap. The tail gate fits in the spot, but secureing it is the issue. It has 2 pull pins one on each side, but I cant figure out how they are...

Latest posts

Forum statistics

Threads
93,001
Posts
1,155,994
Members
26,589
Latest member
tke395

Members online

Total: 815 (members: 3, guests: 812)

Share this page

Top