Search results

  1. 94turboidi

    Anyone ever broke a crankshaft?

    I haven't been on here in quite awhile, anyways my truck was running great all winter even cold starting -20! It was sitting for about a month and I put a jug of fuel in because it was low. It started up and I had it running for about an hour that night. The next day it started right up and...
  2. 94turboidi

    1994 f350 flare side project for sale or possibly part out

    Ok I thought I'd have this forever but I believe metering valve is going out in injector pump and have other vehicles. It has alot of stuff done in the last few years but still needs cosmetic things like interior I started switching to tan along time ago and still need some moulding pieces...
  3. 94turboidi

    WTB Fuel selector valve

    Anyone here have a good working fsv that they know works on both tanks?
  4. 94turboidi

    Need help have an air problem I think

    Okay the truck has been running great. I have only been running on the rear tank as there is no front tank just the lines at the selector valve. I just pulled a tractor 100 miles home and no problem. Well I have an aluminum tank that holds 11 gallons that I wanted to hook up to switch between...
  5. 94turboidi

    Ford specialty tool kits

    Okay I am surfing craigslist and found these not sure if its a good deal or if there is even any tool kits anyone here would need but figured it might be worth a look for some. http://desmoines.craigslist.org/tls/2234651320.html
  6. 94turboidi

    Power steering problem

    Hey I am getting closer to having my truck completely ready for long road trips. Its been sitting a lot lately. This winter I did a hydroboost swap with a used hydro unit that seems to be working great. I put brand new hoses on and a rebuilt cardone ps pump from oreillys so I would have the two...
  7. 94turboidi

    electric lift pump questions

    Okay I was reading another post and didn't want to hijack it with my question. I hear a lot of you guys running electric pumps primarily the carrier pumps. What model of pump is it and where did you get it, how much? Can it be installed to eliminate the mechanical pump? I know pumps like to push...
  8. 94turboidi

    Wanted trailer ramps or welder

    No longer need
  9. 94turboidi

    What ohm range is our sending units?

    I have a tank I am installing on my truck that has a 5 bolt universal hole and I need to get a sending unit that will work with my trucks gauge. Anyone know what range would work for an accurate full to empty ohm range? Thanks
  10. 94turboidi

    7.3 fuel filter heater plug leaking

    Okay I think I have my fuel drip narrowed down to the plug on the top of the filter housing that I believe is the heater plug. Its kind of an oval shape I think. (Its been a few days since I messed with it) I had been thinking it was the 2 piece filter leaking at the base or something and put on...
  11. 94turboidi

    Fuel filter sensor

    Where can I get a new fuel filter sensor for the bottom of the fuel filter? I noticed when I tightened it down it kept spinning. Its separated in two pieces.
  12. 94turboidi

    New fuel filter had a leak

    Okay I have been getting a slight leak from my fuel filter. I have the aluminum screw on base with the fuel filter light sensor and drain. It seemed to be coming from the drain. I decided to just put on the wix 33617 filter that has a port for the sensor and its own drain to eliminate the...
  13. 94turboidi

    Looking for a 94-01 drivers dodge ram 1500 axle shaft

    Okay trying to help a family member out here with a dodge. I think they have a 98 but anywhere around these years will work. I think just the inner shaft from the drivers side will work but the whole stub shaft and ujoint would be better. Let me know a price if you have one and shipping to...
  14. 94turboidi

    Difference between a Mitsubishi Starter and Nippodenso

    Okay we have a blizzard coming in and I was getting really tired of using a bottle torch to heat my starter up so it would work. Sounds crazy but that’s what it would take, seems to of had condensation or something turning into ice when its cold in the solenoid. Even when it would crank over it...
  15. 94turboidi

    Brand new oil cooler on ebay

    http://cgi.ebay.com/ebaymotors/Ford-7-3-Diesel-Engine-Oil-Cooler-F3TZ6A642-C-BRAND-NEW-/270688239206?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f0646be66 Without headers
  16. 94turboidi

    Throwout Bearing ?

    Okay well some of you might know of all the stuff I have recently went through on the truck. Anyways I have a new clutch set on the truck which included throwout bearing and pilot bearing. I was having trouble getting the clutch to disengage until I put an adjustable pushrod on there and it...
  17. 94turboidi

    Its alive!

    Okay que the frankenstein bolts in my neck and some lightening in the background........The truck is about finished up. I got the timing set correctly yesterday and have been working on it 5 minutes here and 5 minutes there and put enough of it together today to fire it up. The starter is still...
  18. 94turboidi

    Off topic Rack and pinion rebuild

    Okay I really couldn't find where to post this and I know there are neon forums and such but figure theres plenty of mechanically inclined folks among us here. We have a 98 neon and I believe the rack and pinion is leaking. I can get a reman for 150 but the rack feels tight and there is a...
  19. 94turboidi

    Glowplugs thinking out loud

    Okay today while working on the truck the glowplug controller all of a sudden started smoking. I verified the wiring was correct a week or two ago and switched controllers from one I knew worked and it has been working fine. Well nothing has changed but now I can't hook up the glowplug main wire...
  20. 94turboidi

    Timing Gears

    Okay well I had the truck too advanced yesterday and I moved it a tooth and it seemed like it was the very same, maybe I put it back in the exact same spot, dunno. Well I got tired of pulling the injector pump blindly and wanted to see what was going on. I tore the front of the motor apart and...
  21. 94turboidi

    Timing problems, clutch problems.

    Okay I have posted about this recently but thought I would start a fresh thread to get some more ideas. I appreciate all the help I have got on here. My biggest problem is the clutch. I put in a new clutch set (pressure plate, clutch disc, pilot bearing, throwout bearing), welded dmf, new clutch...
  22. 94turboidi

    I need a starter.....

    Okay I think I need a starter. I could possibly replace the solenoid at the starter but I don't want to waste money on it. When the starter is cold it will just click (not the fender solenoid I can cross it and it does the same). After turning the key and letting it click several times it will...
  23. 94turboidi

    Missouri CL Finds

    Not mine but I keep finding things when I am looking fo parts for mine: Thats a good price even if you just want the turbo or if you wanted the engine. http://stlouis.craigslist.org/pts/2072370791.html
  24. 94turboidi

    1 step forward many many steps back!

    Well I keep getting closer on the truck but new problems keep arriving. Today I got the rear driveshaft put on, I switched out my entire glowplug controller with another I had around that I know works. Glowplugs stay on for at least 10 seconds but it doesn't fire that good, it must be in the...
  25. 94turboidi

    Can't get in gear while running

    Okay I finally fixed all my little stuff on the truck this morning and went to back it up after I started it. I have a new master cylinder, slave cylinder, pressure plate, clutch, clutch fork. I bled it the other day and I think all the air is out, its moving the clutch fork at least an inch if...

Latest posts

Forum statistics

Threads
91,292
Posts
1,129,828
Members
24,106
Latest member
lewisstevey7

Members online

Total: 798 (members: 10, guests: 788)

Share this page

Top