Blind Driver2
Full Access Member
For some reason this thread was locked down http://www.oilburners.net/forums/showthread.php?62490-ZF5-(S5-47)-Transmission-Rebuild
What are the bearing clearances supposed to be after the main and counter shafts are shimmed?
I replaced the rear case, reinstalled the races and shims. I have zero movement in either shaft, but everything turns easily.
What are the bearing clearances supposed to be after the main and counter shafts are shimmed?
I replaced the rear case, reinstalled the races and shims. I have zero movement in either shaft, but everything turns easily.