Old Banks W/CDR

[65sixbanger]

Old Banks W/CDR and RDT??

Ok I have the Banks Non Wastegated Turbo with the CDR still hooked up to the front of the ip cover. Right now oil leaks around the intake and makes a complete mess after a few hundred miles. I have tried to make a RDT, but last time I did that oil was everywhere when I opened the hood?? Could this have been because I left the CDR bolted on? I really wan to get rid of this leak around the intake. Thanks
Lance

 

[65sixbanger]

Ok lets try this, Does any body run an RDT with a Non-wastegated Banks?

 

[65sixbanger]

Ok... Who has a Road Draft Tube? If so, what turbo do you have?

 

[85hauler]

I'm running a RDT with a nonwastegated banks on my '88. I still have the CDR bolted on but not connected. If you end up with oil everywhere when using a RDT then you probably have something causing too much pressure in the crankcase.

There are a number of things that will cause too much pressure. If the RDT is not routed so that the air passing under the truck creates a slight vacuum on the end of the hose. Or if the air passing under the truck is being forced up the hose. Too small of a diameter hose being used for the RDT. There are alot of possible causes.