Oil Cooler Gaskets

[icanfixall]

http://www.ebay.com/itm/350539284801?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649
Found this and thought it was a fair price for us doing this job... Having a spare set is a good thing too..

 

[Dave Barbieri]

Didn't realize the vans were all that different.....

1983 1994 F250 F350 SUPER DUTY 6.9 7.3 DIESEL



1983-1994 E250 E350 DUPER SUTY 6.9 7.3 DIESEL

 

[icanfixall]

The vans have a differant head on the coolers to clear the cross members and one of the heads has only three bolts in it to the block. Thats the front head. The rear one has the differant angle to it. But the o-rings are the same between the tricks and the vans.

 

[gdhillon]

I myself have been burned by the eseries front header gasket...the ih dealer here only has the part number for the eseries gasket so I had to go to ford to get the fseries one. The parts guy had a theory that ford put on there own front header for the trucks

 

[riotwarrior]

The vans have a differant head on the coolers to clear the cross members and one of the heads has only three bolts in it to the block. Thats the front head. The rear one has the differant angle to it. But the o-rings are the same between the tricks and the vans.

So...is this a FORD F series TRUCK setup or a VAN setup......*****

I'd say TRUCK from what I see and know as truck stuff....just don't have one in hand to compare!

 

[icanfixall]

The picture shown is for the trucks but the o-rings will fit the vans too.

 

[typ4]

I can beat that price,

 

[icanfixall]

Oh boy thats good news right there....