Help please

[Salvatore vaci]

I have a 02 7.3 with a 7.5 inch lift running 37s with slight rub on full lock it’s rubbing on back end of wheel well towards cab more to the inside frame is there a way to cut that out ? Or should I go higher anybody have these issues lookin for advice thanks

 

[clint bartels]

My advice would be to change wheel offset or tire size. I can"t say as I have ever seen good things happen from cutting to make them fit.

 

[Salvatore vaci]

I was thinking riding the thread down nd then selling the rims changing offset it’s a bit much at -76

 

[Sidewinded_idi]

It’s hitting your radius arms If it’s 2wd. Impossible to cut them. Only thing you can do is more offset to your wheels or spacers

 

[Salvatore vaci]

I think my offset is the issue at -76 it’s not quite the radius arm @Sidewinded_idi it’s more the metal where the running boards are mounted if makes sense

 

[Salvatore vaci]

And it’s 4wd

 

[DaveBen]

Post a photo. It is NOT that hard.

 

[Salvatore vaci]

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

You must be registered for see images attach

 

[Thewespaul]

For a temp fix I think the BFH mod is in order

 

[Salvatore vaci]

Bfh to the front ? 7.5 inch lift now should I go to 10 or 12 inch lift?

 

[Thewespaul]

BFH= Big Friggin Hammer.