WhiskeyBottle2
Full Access Member
Hello Everyone...I know my rear axle v131a L10102 is a 12 bolt 4.10 limited slip axle. What I don't know is if it is a full floater or semi floater.
It has 8 bolts on the face that is in the center of the dually wheels. The face is flush with the center of the outside wheel. The wheels are alcoa aluminums so about 1" thick or so.
My truck is a 1986 F-250 4x4 dually conversion, xlt lariat, 6.9L N/A with a zf-5 speed and Borg Warner 1345 transfer case.
So...is the rear axle a full floater? If so, what does that mean?
Thanks very much guys for answering.
It has 8 bolts on the face that is in the center of the dually wheels. The face is flush with the center of the outside wheel. The wheels are alcoa aluminums so about 1" thick or so.
My truck is a 1986 F-250 4x4 dually conversion, xlt lariat, 6.9L N/A with a zf-5 speed and Borg Warner 1345 transfer case.
So...is the rear axle a full floater? If so, what does that mean?
Thanks very much guys for answering.