extra cab rear seat?

[1992F-250IDI]

ok so as most of yall know the back seat in an extra sit really low with no leg room i was thinking about may be jacking it up so it could be a little better and maybe put a sub woofer under it anyone done this thanks josh

 

[65sixbanger]

I have actually seen brackets that raise the back seat and I guess they are homemade...

 

[Diesel_brad]

If you google it. there are production brackets to rase the seat

thy here http://www.lmiwelding.com/seat1.htm

.
.
.

 

[remington88]

i have seen them but thought they were custom also

 

[Sycostang67]

My 85 had homemade brackets, made from 1" square tubing. They did a pretty good job, I sold them on CL for $20. I also found a pair on a 90 that I parted out that were manufactured, had a label but cant remember who was on it. I sold those on CL as well.

 

[damac]

Is an extra cab different from a supercab? I am no techie when it comes to these trucks but I did notice when shopping around a few months ago that some trucks had a tunnel down the middle, and some had what looked like a small back bench seat but with no legroom like you said, like only good for storage and kids.

On ours though it is flat across the floor front and back so a normal sized guy could actually sit back there. Leg room with our front bench is another story but the room in ours seems to be the same as a friends 2008 dodge 4 door pickup 2500.

 

[Diesel_brad]

Is an extra cab different from a supercab? I am no techie when it comes to these trucks but I did notice when shopping around a few months ago that some trucks had a tunnel down the middle, and some had what looked like a small back bench seat but with no legroom like you said, like only good for storage and kids.

On ours though it is flat across the floor front and back so a normal sized guy could actually sit back there. Leg room with our front bench is another story but the room in ours seems to be the same as a friends 2008 dodge 4 door pickup 2500.

A super cab is made by FORD. An Extended cab is made by GM. And dodge calls theirs a Quadcab

 

[swuchase1]

i put one it mine also from LMI works good ez to install you need to use seatbelt ext. still folds flats. gives you about 3" more under seat i put SUB under was very tight. You can put subs in the panel under window i put 6X9 in there.

 

[Sycostang67]

Some of the 80's trucks had jump seats in the back of the cab instead of the bench. I saw one such truck in the junkyard a couple years ago.

 

[jamesdsims]

i have an88 and completely removed the back seat. i then made a sub enclosure with two 10s and a600 watt amp plus two cubic feet of storage. then covered the whole thing with mathing carpet. my wife then made cusions covered with matching colored leather.

 

[david85]

Both my trucks have the rear bench raised by about 4". The F150 came with it when my dad bought it used. My F250 got the upgrade I made for it after studying the F150 "lift kit".

Its possibe that this was once available as a dealer kit.

 

[65sixbanger]

Both my trucks have the rear bench raised by about 4". The F150 came with it when my dad bought it used. My F250 got the upgrade I made for it after studying the F150 "lift kit".

Its possibe that this was once available as a dealer kit.

Do you have any pics of this?

 

[Jake S.]

I have a kit too. It's made out of 1/4 inch flatstock steel. The latch to lock the back up has to be moved also.

 

[david85]

Do you have any pics of this?

Actually I do. Mankypro asked for it a while ago

What you see here is the F150 with what I think is a dealer or aftermarket kit.
The 3 point seat belt was my doing though.

 

[h2odrx]

so the latch stays in place?