dogobat
Registered User
is there any trick going to a 12" clutch, or is it a bolt on upgrade? 1986 F350 DRW cab and chassis 4x4 t-19 4 speed
Last edited:
I ran a 12" on a t19 on a 460i seem to remember that a 12" wont fit the T-19 bell housing
Do the 1986 trucks have the same 'pedal bearings' the OBS trucks did? If so they are plastic and will wear enough to reduce clutch pedal travel making it hard to shift, can't completely release the clutch.Before you replace the clutch for hard to shift complaints, check hydraulic fluid level, check for leaks, and check firewall for flexing when clutch pedal is depressed. If you need to replace the clutch, for best results, be sure to resurface flywheel, inspect clutch fork and pivot ball. My 2 cents.
Do the 1986 trucks have the same 'pedal bearings' the OBS trucks did? If so they are plastic and will wear enough to reduce clutch pedal travel making it hard to shift, can't completely release the clutch.
I'm not sure. But good to add to the checklist.
Sent from my SM-N960U using Tapatalk