BRICK NOSE PICTURE THREAD
- Thread starter IDIoit
- Start date
Here what all I have tried to remove the rhino liner so far.
Temp 1: Side grinder.. That is a mess and does a lot more damage to the panel then I want it to.
Temp 2: Heat gun and scraper.. Takes way to long!! Took roughly 20 min to do a 12x12 (inches) area.
Temp 3: Aircraft paint remover.. fastest way I found so far. can strip whole fender roughly in 30 min
I was thinking of applying aircraft remover and let it bubble up some then take my power washer to it, but it's broke at the moment.
All I know no matter on my plan of removal it takes some of the paint with it.
Temp 1: Side grinder.. That is a mess and does a lot more damage to the panel then I want it to.
Temp 2: Heat gun and scraper.. Takes way to long!! Took roughly 20 min to do a 12x12 (inches) area.
Temp 3: Aircraft paint remover.. fastest way I found so far. can strip whole fender roughly in 30 min
I was thinking of applying aircraft remover and let it bubble up some then take my power washer to it, but it's broke at the moment.
All I know no matter on my plan of removal it takes some of the paint with it.
IDIoit
MachinistFabricator
your best bet is to use aircraft stripper and get it all down to bare metal.
then use a DA sander with 36 & 80 grit.
everyone tells me to rhino line my truck, but...no thanks!
you can also try a 36 grit on a high speed buffer.
may gum up the paper alot.
stay away from edges tho.
then use a DA sander with 36 & 80 grit.
everyone tells me to rhino line my truck, but...no thanks!
you can also try a 36 grit on a high speed buffer.
may gum up the paper alot.
stay away from edges tho.
riotwarrior
Full Access Member
WATER ....WATER.....use a very HIGH volume HIGH pressure power washer with sandblaster attachment!
Just saying...that should remove any and all of the rhino liner and then some..
Just saying...that should remove any and all of the rhino liner and then some..
You must be registered for see images attach
Well got all the Rhino liner off the hood. They spray painted with black paint where the rhino liner started to peel up from. I'm surprised the paint remover didn't remove it as well. Hopefully I will have good weather Sunday
(50% chance of rain) and no emergency calls to run. I can drag out the air compressor and sand this front end with 80 grit DA. Then touch it up some with 220 grit. Rest of the cowl panel is black paint.I got this accomplished yesterday before the wife yelled at me to come in lol. Nothing fancy just rattle can primer for now. Once I get my barn built and of course a back up truck this will be done correctly. But for now get the rhino liner off it. I'm wondering of I can paint chrome black?
You must be registered for see images attach
stealth13777
Full Access Member
Just an opinion, but that's like taking the bad looking rhino liner and moving it to pieces that should be shiny. I never like painted chrome.
That said, prime first, but it should take paint. Best thing I imagine would be to sand it first. But then there's no going back.
Sent from my iPhone using Tapatalk
http://buy1.snapon.com/catalog/item.asp?P65=yes&tool=all&item_ID=644425&group_ID=681242
One of these would get that rhino liner off and quick, but it's a lot of coin to spend. You would still need to sand with 80 grit before priming as well.
One of these would get that rhino liner off and quick, but it's a lot of coin to spend. You would still need to sand with 80 grit before priming as well.
GENIUSLOERTS
Full Access Member
seems like you could buy the wheel and run it on any angle grinder.
GENIUSLOERTS
Full Access Member
I do indeed 
Rhino loads the ole 458 winmag!
My ole brick' gen 1 banks c-6 4:10's
You must be registered for see images attach
My ole brick' gen 1 banks c-6 4:10's
mrhorton88
Registered User
You must be registered for see images attach
You must be registered for see images attach
You must be registered for see images attach
Pressure washer
Bought a pressure washer today and played with is a little I did this to my Drivers door took roughly 2 min with no chemicals. If I have time this weekend I will put paint stripper on then spray it.
Bought a pressure washer today and played with is a little I did this to my Drivers door took roughly 2 min with no chemicals. If I have time this weekend I will put paint stripper on then spray it.
You must be registered for see images attach
Similar threads
