Bullitt008
Registered User
Looking for any help I can get. Haven’t worked on many IDI’s, know all the power strokes by heart (was a ford diesel tech from 2003 to 2013) Anyway got an 89 F-super duty someone else removed the engine and stripped to put a reman in and now I get the “basket of parts” and the “here you finish it.” Old engine has been shipped back as core I have no pictures for reference. My
Question is on the RH side of the engine there is coming off the harness 3 right angle connectors. I know the blue one goes
To the filter housing and also a red one that connects to the bottom of the filter ( I assume anyway) and finally a black wire ( I think it’s black I’ve cleaned,scrubbed and stripped back a Little and it appears black) where would this wire attach? I don’t see any sensors or even ground posts to attach it to if it is a ground. I don’t get stumped often but this one has me chasing my tail.
Question is on the RH side of the engine there is coming off the harness 3 right angle connectors. I know the blue one goes
To the filter housing and also a red one that connects to the bottom of the filter ( I assume anyway) and finally a black wire ( I think it’s black I’ve cleaned,scrubbed and stripped back a Little and it appears black) where would this wire attach? I don’t see any sensors or even ground posts to attach it to if it is a ground. I don’t get stumped often but this one has me chasing my tail.
You must be registered for see images attach