29EssexRat
Registered User
So picked up a pair of 2008 F350 DRW axles, there's tons of info on 2005-2007 axles in OBS, pretty straight forward process it seems, tons of good writeups. Currently working on the rear axle, and noticed the brake line is larger 1/4"-ish hard line going to flex hose, then the T, and then splits off into two 3/16"-ish lines to the calipers. How should I go about connecting this to my truck's 3/16" brake lines? Just an adapter fitting, or should I attempt to get a custom flex line? No where around me that would make such line, so would have to find someone online to make such flex line, which sounds difficult.
I do not know the size or thread pitch right now, so if someone knows off the top of their head that'd be cool too. Also, if there's any 2008+ write ups handy, I'd appreciate the links, tried the search, but didn't come up with anything, although my "computer literacy" is pretty poor. Thanks in advance!
I do not know the size or thread pitch right now, so if someone knows off the top of their head that'd be cool too. Also, if there's any 2008+ write ups handy, I'd appreciate the links, tried the search, but didn't come up with anything, although my "computer literacy" is pretty poor. Thanks in advance!
