Search results

  1. kcwright1979

    Ferret V765-01

    Only used twice no longer have a IDI 250.00 shipped PayPal or Chime
  2. kcwright1979

    7.3 IDI partout

    The time has come for me to move on from my IDI :( I don’t have the time anymore. I will be parting out my built engine that lost a oil jet after just 3000 miles. Items that I will be selling are as follows: R&D RD2-90 pump 500.00 with lines ***SOLD**** R&D Billet return lines brand new 220.00...
  3. kcwright1979

    T-19 460 bell housing

    Need a t-19 transmission bell housing for the 7.5L
  4. kcwright1979

    ISO 4x4 ZF5 diesel

    Need a ZF5 for my truck. Willing to travel.
  5. kcwright1979

    1990 F350 and diesel badges

    pulled then of my old truck, don’t need anymore all are in one piece. 80.00 for all or trade for obs wait to start panel
  6. kcwright1979

    WTB: OBS wait to start panel

    Looking for part F2TB-10B987-AA Wait to start, water in fuel, overheat panel
  7. kcwright1979

    1990 F350 4x2 ZF5

    I am selling my 4x2 ZF-5, project is moving into a 4x4 so I no longer need. I believe it was rebuilt before I got the truck, shifts smooth. Will have pics up tomorrow $600.00 Located in Medford Oregon
  8. kcwright1979

    1990 F350 Dually rims and tires

    Have 4 brand new rear drive tires, less than a 1000 miles on them and a almost new steer tire. The other steer tire is worn but good tread. My project has taken me in another direction and dont need them anymore. Came off of a 1990 F350 Dually. Tire size is 235/85-16 $650.00 Currently in...
  9. kcwright1979

    Anybody else use?

    Just curious about oil longevity with the filters. How well do they filter the soot out and for how long. I’m getting my engine back together after losing a oil jet cause the shop failed to use lock tite on them and lost oil pressure.
  10. kcwright1979

    WTB: Bricknose interior parts

    I am changing out the blue interior of my 90 F-350, parts needed: Grey dash Grey door pillar trim both sides Grey kick panel both sides Front grey windshield/headliner trim If anyone needs those parts in blue my dash is clean with no cracks.
  11. kcwright1979

    7.3 IDI lost oil pressure

    Hey guys haven't spent the most time on here recently with work and tidying up the truck my days are shot.. Anywho I was driving into town today as any other day, listening to the sweet sound of turbo whistle and the engine purring like a kitten. Pulled into my buddies shop, back up into a...
  12. kcwright1979

    Needing info on itake and exhaust studs.

    As the title says I am coming to the end of my build and am getting ready to put the intake manifold on, I will be running about 18-22 psi of boost with the fuel I am running. Has anybody else installed studs on the intake and exhaust? If so what sizes/lengths did you use and where did you...
  13. kcwright1979

    WTB: Hypermax turbo pedistal 7.3 IDI

    if anybody has any and are willing to sell it would be appreciated.
  14. kcwright1979

    For Sale 093 turbo kit

    As it says I've decided to join the top 10% of IDI power houses and gonna go with a bigger turbo and keep egts down so I've decided to sell my kit it's a Garrett factory reman CHRA with brand new turbine wheel had the WW2 installed it's got the bigger exhaust housing and DP flange I cleaned and...
  15. kcwright1979

    ATS 093 Slip fit pipes

    I have been looking at those pesky slip fit pipes and know they can leak like crazy. I'm pondering at getting some V bands and welding them on to get rid of that weak link in the system.
  16. kcwright1979

    *FINALLY* My bulid is started

    Ok guys here it goes finally able to post what I am doing as I have all the pieces in place for what I am building. 7.3 IDI Block sleeved on all 8 Mahle STD destroked .10 pistons milled another .15 and ceramic coated TYP4 cam 7.3 heads rebuilt with new pre chambers and comp 910 springs...
  17. kcwright1979

    LUK SMF Flywheel bolts

    I bought a 7.3idi core engine from a guy near me earlier this week for 200.00 and was talking with him and he told me he had some extra parts laying around, so I said sure ill take them off your hands for you so he gave me another ZF5 syncros are bad in it and he went on to say he had another...
  18. kcwright1979

    ARP STUD INSTALL BLOCK THREAD FAILURE

    I spent the better part of the other day installing my ARP head studs, cleaning out the holes and using a bottom tap to get them as perfect as I could. Soooooo as I was installing my nicely bulit heads that I got back from the shop yesterday with new pre cups and comp 910-16 springs and my...
  19. kcwright1979

    Mishimoto Intercoolers

    I am entertaining the thought of an intercooler. 1500.00 for a kit is out of the question, I want to keep my A/C intact so was wondering if anyone has used a Mishimoto universal intercooler, took the measurements and I could fit one in the brick nose...
  20. kcwright1979

    **UPDATE** FP DIESEL GASKET SET

    So today I received my gasket kit and my thoughts on it are the head gasket is built excellent. has the International part # stamped in it (wonder if this is where they get them form. The head gaskets measure 0.086 thousands of a inch (don't know how thick other gaskets are) and the kit...
  21. kcwright1979

    FP DIESEL GASKETS

    So I have been doing some research and found there to be several companies to offer head gasket sets (Victor,Fel-pro,Ford oem, and international oem). I ordered the victors and when I got them they were horrible fire rings dancing around in the gasket and just not put together well, so I ordered...
  22. kcwright1979

    WTB: 7.3 pre chambers

    Hey guys I'm desperate need atleast 6 useable pre chambers or 8 if it's a set I've exhausted all other options and diesel cast does not supply them unless you buy the whole head. This is the only thing holding up my build.. If I can't get them its new head time and I didn't want to have to drop...
  23. kcwright1979

    Who's looking for a turbo

    Here's one I seen on eBay non waste gated 088 http://pages.ebay.com/link/?nav=item.view&alt=web&id=111532793795
  24. kcwright1979

    Need 7.3 pre chambers

    Hey guy's getting ready to send my heads off to the shop and I noticed that I have four pre chambers cracked past the fire ring:eek: if anybody has any spares laying around I could use them. side note they are stamped 88 on them. Thank you.

Latest posts

Forum statistics

Threads
91,284
Posts
1,129,796
Members
24,099
Latest member
IDIBronco86

Members online

Total: 771 (members: 5, guests: 766)

Share this page

Top