Search results

  1. Chevyboy_0

    '87 F250, Reg Cab 2wd for sale

    I finally made up my mind, the truck is for sale. Its an 87 f-250, Reg Cab 2wd, with the 6.9/T-19. The motor has new head gaskets, New Delphi "BB" codes, new water pump, new belts, new radiator cap, and a new Carter Electric Fuel pump(p/n 4070) The interior is pretty sweet if I do say so myself...
  2. Chevyboy_0

    From a gas station in Reno

    /\ That happened to my Chevelle a couple times before, I had to stomp the brakes and stop because some moron decided the Green light meant stop. and the brakes didnt feel right, upon inspection I found that the slider bolts were wore out along with the bushings. I know exactly what O'Reilys...
  3. Chevyboy_0

    Thinking about selling

    Thats why i want one. I will settle for an Auto if I have to, but I if I can get $2k from my truck Ill go buy it this weekend.
  4. Chevyboy_0

    Thinking about selling

    Ill try it and see what happens. Honestly I think I just wanna sell it. I found a nice 90 Bronco, with the 5.0 and a 5 speed ;)and leather, A/C, and power everything. The guy wants $1900 for it with 120k miles
  5. Chevyboy_0

    Thinking about selling

    Should I just try and run a hot wire from B+ to the FSS and see what happens? Dont get my wrong I love my truck, but right now its not being economical. I have put a ton of money in to it trying to get it working right but I dont want to work on it anymore. I have to work on the Chevelle...
  6. Chevyboy_0

    Thinking about selling

    I hate to say it but I'm thinking about selling my truck. I'm just getting extremely frustrated with all the work and time I've put in to it and it still not running. I'm really close to getting it there but now when I bleed the system I don't get any fuel past the IP after installing my new...
  7. Chevyboy_0

    custom air intake size

    I machined mine out of 6061 AL.I started out with a piece of 5" tubing with 1/4" walls, The base was turned out to 5.250" and I welded a cap on the top and turned it to clean it up all nice and pretty like :sly Then I milled a hole in the side and welded a piece of 4" tubing in the side. I made...
  8. Chevyboy_0

    Motivation dwindling on would be project!!!

    I gotta agree with Towcat on this one. But then again when I did my '70 Chevelle I did 95% of the body work and bought materials for the paint and that helped on the cost. OTOH a CC LB is alot more real estate to cover then a 1970 Chevelle.
  9. Chevyboy_0

    starts then dies

    After I re did the head gaskets on Miss Becky she would do this too, she did this for a few days until it all of a sudden just stopped doing it. Im sure after opening the fuel system you just got some air in there. But then again it could be something different as well
  10. Chevyboy_0

    Left Coast GTG April 9th&10th 2011

    I think I might know a certain feller who may be able to work something out....
  11. Chevyboy_0

    Left Coast GTG April 9th&10th 2011

    I'm in, Ill bring Burgers and buns? As well as some drinks of some sorts. Put me down for 2 Hopefully if everything goes as planned I should have Miss Becky running, If not I just may have to bring the Chevelle up :sly
  12. Chevyboy_0

    Who needs a dually bed?

    I need it but shipping would kill me to CA. :(
  13. Chevyboy_0

    Thankful

    This same exact thing happened to me in my Chevelle. Luckily I was in the parking lot at the bank. but had just got off the freeway about 5 minutes earlier.
  14. Chevyboy_0

    IDI brings home a new international

    Congrats on getting the new rig running :D
  15. Chevyboy_0

    P u M p P 0 r N

    Thanks for the Picture, Ive always wanted to see the insides of an IP
  16. Chevyboy_0

    One step closer to a running Truck

    Anybody? I've searched the forums and havent really come up with much :(
  17. Chevyboy_0

    One step closer to a running Truck

    Today I finally had some spare time to work on Miss Becky. I got a barrel and a barrel pump to pump out the fuel tanks. Now that is finished I am going to drop out the tanks and clean them really well, clear out the Injections lines, install my Carter Elec fuel pump, and my slick new Water/Fuel...
  18. Chevyboy_0

    Bought a NICE ONE today boys,,,,

    -Drool-Drool-Drool-Drool-Drool-Drool Everytime I see these pictures I start drooling....Do you have a payment plan option?
  19. Chevyboy_0

    Continuing difficulties in obtaining new injectors

    I have a set of used injectors I pulled out of my truck when I rebuilt the motor if any one needs a set of cores. 7 are good but one of them committed suicide on removal. The nozzle got stuck in the head and was mangled upon removal. Just thought I'd throw it out there
  20. Chevyboy_0

    OK what am i doing wrong!

    /\ what he said ;) Thanks Towcat, someone told me how to replace the fuel pump a while back, I guess i mixed it up
  21. Chevyboy_0

    Some more pic of Project 1Fiddy

    Its so clean and shiney!!!!!
  22. Chevyboy_0

    OK what am i doing wrong!

    While you are barring over the motor use a mirror on a swivel or something like that and look for the push rod. IIRC its ~1" dia and when you see the round silver thing in the mirror its at low cam.
  23. Chevyboy_0

    Rough idle when truck restarts even when warm

    When you redid the O-rings, and caps did you replace the Olives in the brass fittings towards the back of the motor?
  24. Chevyboy_0

    Lookie what I just picked up.

    Wait a second how did my new rims end up in florida??? Gosh Darn UPS they never get anything right Those things a pretty sweet ;Sweet
  25. Chevyboy_0

    Missile Silos

    :rotflmao:rotflmao:rotflmao Did anyone else see this @0:37 " During NORMAL use, Pypes Exhaust Systems are Environmentally Friendly " Just freaking made my day

Latest posts

Forum statistics

Threads
91,306
Posts
1,130,045
Members
24,117
Latest member
olsen726

Members online

Total: 673 (members: 6, guests: 667)

Share this page

Top