Search results

  1. 02x72

    Leece Neville Problem

    The Leece on my 93 F350 stopped charging, and I'm new to these units. I know that it is internally regulated and are pretty bullet proof, but is there an easy way to tell if the regulator went out on it since that's a much cheaper repair. I'm getting no charge off the positive terminal, but if I...
  2. 02x72

    Baumann/ US Shift Controller

    Had installed on my truck, for E4OD transmission, comes complete with wiring harness for that, CD to load onto your computer to control it, and cord to sync unit and a computer. In great shape, only used for about 2 months really before I had to park the truck a year ago. Only selling because I...
  3. 02x72

    New E4OD test run, help with shutter

    Finally got my new Baumann controller in, which is sweet btw, but have a few issues. First, there is a very notifiable shutter when accelerating though first and second gear, then a horrible one when I get to about 60. All of the shifts are very very firm, but that could just be a tuning issue...
  4. 02x72

    FILP Wires

    Im installing my new Baumann controller and am hooking up the FILP wires, but the new clip from napa just has three white ones. I found a while ago a page telling which ones they are, but cant find it. Can anyone tell me which is the ground, feed and output signal on the sensor. Maybe in a...
  5. 02x72

    Bench Bleeding Master Cylinder

    For the life of me I cant get this damn thing to bleed. Two from Napa, and one from Orileys and they are all doing the same thing. won't build up pressure on the bench, and when installed the pedal has no resistance. All of them were new, not rebuilt. I am replacing it because the old one is...
  6. 02x72

    Tach Sensor Fix!

    So as we all know our tach sensors are prone to having the wire sheathing split as it enters the sensor and leaving us with no choice but to head down to the dealer and bend over for a new one. Well not any more guys! In a effort to fix my intermediate tach, I set out to find a better way to do...
  7. 02x72

    Tach Sensor Wire colors

    Somewhere along the line in my rewire of the truck I cut the tach sensor wires on the harness. I cant find them, but have access obviously to the main harness. Can someone tell me what colors they are just past the connector, Ive searched and come up a few different answers. Thanks guys
  8. 02x72

    Starting a new E4OD

    Its not a new transmission, stole it out of my last truck with about 3k miles on it, but I need your guys advice on starting. Most importantly, I dont have a controller hooked up to it yet, but would it be ok to fill and start the transmission without it hooked up? Im not sure how the trans...
  9. 02x72

    E4OD input shaft oring

    Can the green Teflon seal in the front of the input shaft be replaced with an oring the same size? It's a tiny bit bigger, but I don't know how collapsed the Teflon ring is either. Ford is a week out so get the rings, I have an oring thy fits and want to get this tranny back in the truck. Any...
  10. 02x72

    Baumann Controller

    Im probably going to go this route now that Ive started my E4OD swap, and I know I could probably call them and get these answers but I trust you guys more. I understand that it just needs three inputs to run, being TPS, Gear indicator and Solenoid I believe With my swap from a C6, I have the...
  11. 02x72

    No Start

    Trucks not wanting to start, and the only thing I can think it would be is the new Moose pump. Installed it 3 weeks ago, it ran ok for about a week then I could just tell the truck was acting funny, checked the timing again and all was ok. A week ago it died pullling into a parking lot and now...
  12. 02x72

    Timing in Central Iowa

    Just wanted to let anybody in range of Des Moines know that I'm available to help time motors, just got my Ferret adapter in the mail today. No charge, just want to help anybody out in the brotherhood that needs it. Gonna try it out this weekend when I swap out my pump and injectors so we'll see...
  13. 02x72

    Gear Vendors for Sale

    Ive got my Gear Vendors up for sale. Its been having a problem where it will shift on its own out of overdrive sometimes so I dont know what that it. Includes the computer and adapter for E4OD trans. $450
  14. 02x72

    Hypermax Turbo Kit

    Ive got a complete Hypermax kit for sale. Works great, virtually no play in the shaft. I'd consistently see 6-7 psi running down the road with it. Pulled the engine for a headgasket repair and found more problems so the trucks getting tabled for a cummins swap. I'll even throw in the valve cover...
  15. 02x72

    Gear Vendors Value Question

    Im considering putting my gear vendors up for sale, but am not sure of the value of it. Its got a few issues, most notably a problem with it slipping out of OD on its own sometimes. Its an intermittent issue, so its not completely blown up, but not working correctly either. So I figure its value...
  16. 02x72

    Pulled the heads, have a few issues

    In an effort to find out why my motor would not reach operating temp and was using a lot more fuel than usual the past few months I pulled it suspecting a head gasket issue. Well the gaskets look fine, but theres a few things i found wrong. First off, pistons 1,5,7,2,6,8 all have cracks in them...
  17. 02x72

    hypermax up-pipe removal

    Removing the engine from my truck and need to get these guys off to make it a little easier. Somehow the bolts holding them to the manifolds came off in one piece with alot of PB Blaster, so of course they've gotta be a pain on the top end. I've got the small bolts holding the little bracket...
  18. 02x72

    Not reaching Operating Temp

    My '90 is running around 130 degrees at full temp, which has been confirmed by two aftermarket gauges. Ive changed the t-stat with a new motocraft unit that I confirmed was working before it went in. Cooling system is building pressure and will hold it fine once the engine is turned off. What...
  19. 02x72

    Pulling Engine- Advice Welcome

    Looks like Ive got a blown head gasket( not getting to operating temp, loosing coolant, blowing white smoke) so Im gonna have to pull the engine here soon. Unfortunately taking the front clip off the truck is not an option, so its gonna be done the hard way. I plan to replace everything...
  20. 02x72

    Headgasket Issue?

    A few months ago I noticed that my '90 was not getting to operating temp, it sits around 150 degrees. I contributed it to a bad t-stat, even though it was only 8 months old. So today, I replaced it with a new one, and noticed that the coolant was a cloudy green with a small amount of white in...
  21. 02x72

    Gear Vendors took a dump, options?

    I bought my truck last June, had a gear vendors installed from the dealer in August'89 I was told(bought it from original owner). There was always a slight vibration when it was engaged, and has gotten worse in the last few months. I dropped the pan and cleaned the filter 3 months ago, and a...
  22. 02x72

    OK Guys, how can I fix this one?

    Installing my new IP and I ran into a problem getting the round nut off the throttle shaft to connect my TPS sensor. One of the two Torx screws broke off inside there. Ive gone through 4 drill bits trying to get this thing out but its not working. Anyone know where I can find this thing?
  23. 02x72

    IP to TPMS Mount

    Im in the process of installing a my new BB injectors and Moose pump and things were going perfectly until I went to take the small pice on the IP to connect the TPS to it. The Torx screw inside it broke off and now I cant get it off. Im going to try drilling it outm but I dont know what damamge...
  24. 02x72

    E4OD Tailhousing

    Are the tail housings the same between the gas and diesel versions of the E4OD? I need to take the gear vendors off my truck but the tailhousing is stuck in storage across the country.
  25. 02x72

    Running Rough Today, Whats Broke?

    Driving the truck truck today it started to run horrible all of a sudden. I stopped to get fuel at a place I regularly go and a few blocks later it started running like its on 5 cylinders. First and second gear are horrible, and it clears up a bit once I get into third, but its still noticeably...

Latest posts

Forum statistics

Threads
91,287
Posts
1,129,810
Members
24,101
Latest member
dieselmainiac

Members online

Total: 544 (members: 2, guests: 542)

Share this page

Top