Search results

  1. LUCKY_LARUE60

    Block Heater

    My sons 92 F350 7.3 IDI needs a block heater cord. Not sure what cord it uses so if anyone has a spare cord I sure could use it or give me a part number. Thanks, Jim
  2. LUCKY_LARUE60

    Power Door Locks

    This is not an IDI but maybe I can get some help here as not many people are on the powerstroke board. Here is the problem, my truck was a bank repo when I bought it. I guess when it was repoed they broke the door lock on the drivers side to get in and destroyed the lock and the rods inside...
  3. LUCKY_LARUE60

    F650 dash for 99 and up Superduty

    This is for a auto trany http://www.riffraffdiesel.com/mm5/merchant.mvc?Screen=PROD&Store_Code=RRD&Product_Code=RDP650A&Category_Code=F731-RDP-650 They also have them for manual tranys
  4. LUCKY_LARUE60

    Got a IDI question

    Haven't been here for a while as I got rid of all my IDI's all I have now is my Power Stroke, a friend called me and was asking me what the temp sensor was called that controls the fast idle. I didn't have answer for him. Seems his is acting up and will turn on the fast idle randomly. Says it...
  5. LUCKY_LARUE60

    ESOF 4X4

    Been have a problem with my SOF 4X4, some times for no reason the 4X4 light on the dash will come on and then go off when I have it in 2HI. Then when I need 4X4 it will not work, the light will not come on and the T case will not engage into 4X4. At time setting still I will shift it and I can...
  6. LUCKY_LARUE60

    I bought a newer truck

    I bought this truck 3 weeks ago and it ran a little rough, had codes run twice and could not find the problem. Well had the CPS replaced by Ford under the recall and they ran the codes again and they said no codes came up HHHHHHHHmmmmmmmmm. Motor sill running rough, ran across a friend that has...
  7. LUCKY_LARUE60

    Tilt Steering

    I,m back home from Texas and am working on my 92 350 dualy, the tilt steering has a bad bearing where it tilts, in fact it is gone and all is left is some dust and the outer cage. Where can I get the bearing. Thanks Jim
  8. LUCKY_LARUE60

    Vacuum Pump

    I am in Paris, Texas working on a pipeline and my vacuum pump is going out. I checked with the 2 parts houses here and they were unsure if they had the right one. As my truck has a serpentine belt neither place showed one with that. If anyone knows the correct part number, please let me know. I...
  9. LUCKY_LARUE60

    Bought another IDI

    I ran across a deal I could not walk away from, 92 XLT F350 2wd dually, new e4od trany, 2 new front tires, extended cab. 7.3 with 161,000, body good shape, interior not bad. One rear fender has a crack that can be fixed, but the rest of the truck is straight, $2000. Not sure what I am going to...
  10. LUCKY_LARUE60

    Help, Need a Y pipe

    I need a Y pipe for a non turboed IDI in the worst way. I am going to pull my turbo off and because I am on a 6 day 60 hour work week and I need my truck bad I can't put my truck down. As there are no muffler shops open on Sundays, the only day I have off to have one made, I am hopeing someone...
  11. LUCKY_LARUE60

    Backup lights

    Can someone tell me where the backup lights switch is on a ZF5? I have mine wired into the cab on a toggel switch, can't find the switch on the transmission. Jim
  12. LUCKY_LARUE60

    Can't build boost

    I can't understand why I can't build boost. I have checked everything, checked for leaks, turned pump up, checked waste gate. I am at the end of things to check. This is a factory turbo set up off a 94 IDI. I can hear the turbo spool up but it just won't build boost, the most I have seen is 1 to...
  13. LUCKY_LARUE60

    "0" boost

    I put a boost gauge on today and the needle just bearly moved comming up BIg hill and standing on it. The gauge is brand new and I doubt it is bad. I can hear the turbo spool up so it is working. What now, more fuel and how much?????????????? Also, Mel PM me about a Moose Pump. Jim
  14. LUCKY_LARUE60

    Getting rid of some stuff

    Now that I have the engine in and the turbo on I am going to get rid of some stuff. A set of 6.9 heads, plus a 93 7.3 motor. As for the 7.3 it needs some attenision. Not sure I am going to let the IJ pump and injector lines go or not. If no one want the 7.3 I am going to take it to a scrap yard...
  15. LUCKY_LARUE60

    Stubborn Oil Leak

    After the new engine was installed I have a oil leak under the turbo where the turbo bolts to the oil drain tube pedestal. And yes I am sure it is not where the tube goes into the valley pan because I can see the oil dripping from the drain tube. Yesterday I pulled the turbo and replaced the...
  16. LUCKY_LARUE60

    Engine coolant temp

    I am back home from a 3 and a 1/2 week job in Texas. While I was gone I had another engine put in my pickup. Have a water temp issue, my temp will go from 190* to 205* and then back to 195* and back and forth. Because the new engine came from a 91 and mine is a 93 I thought the water pump might...
  17. LUCKY_LARUE60

    Engine Change

    Due to 3 things, loss of oil pressure, a knock in the engine and a large oil consumption, a gallon in 600 miles, I have decided to change engines. Now the good part, I happened to talk to a good friend of mine today and was telling him of my woe's and he ask why I didn't change engines? He...
  18. LUCKY_LARUE60

    Not Good-Lost some oil pressure

    Well not sure what to do at this point. I lost about 20psi, I know what is going on I think and I'm not sure what to do. I always carried around 63psi when hot on my manual gauge but now it's down around 20 to 25 now. How hard is it to pull the pan with engine still in the truck. Or is it...
  19. LUCKY_LARUE60

    Precup's

    I was wondering what would happen if you remove the plate that covers the precup chambers and installed the heads how that would effect the motor. I know it would lower the compression but how much, I am sure it would be hard starting? Just thinking, what is the purposes of precups any way? Jim
  20. LUCKY_LARUE60

    Turning the pump up

    I need more fuel after the turbo install. I know where the plate is and which way to turn the screw, I'm going to turn the screw a 1/4 turn and see what that dose. How do I know when the screw is lined up with the window, if the line on the dampener is lined up with the pointer will that be...
  21. LUCKY_LARUE60

    Inside Door Handles

    I have broke 2 black plastic handles in the last month, I don't jerk them just pull up like I always have done. The first one was the one that came out on my truck and the 2nd one I bought from parts store. When the 1st one broke I figured it was just old and it was -1* out but when the 2nd one...
  22. LUCKY_LARUE60

    GPC

    Here Ya go http://cgi.ebay.com/ebaymotors/NEW-FORD-7-3-7-3L-DIESEL-GLOW-PLUG-CONTROLLER-001_W0QQcmdZViewItemQQcategoryZ33693QQihZ023QQitemZ360002243517QQtcZphoto
  23. LUCKY_LARUE60

    Turbo Is On

    I thought I had thought of everything before I stared this install, factory turbo off a 94 IDI, well I didn't but just a couple of minor things. Had hope to get it done in a couple of hours, boy was I wrong, 9 hours later I took it for a spin. Sure made ole truck sound different and has some...
  24. LUCKY_LARUE60

    Turbo Project

    As I am laid off I decided to go ahead and install the turbo on my truck I had this thing laying around for over 2 years, this is a factory turbo, there were a few things missing. This is not a Bank, Hypermax or ATS kit but a factory turboed 94 idi. Rather than put my truck down for this...
  25. LUCKY_LARUE60

    Down Pipe

    OK guys, looks as I may have to do a hurry up turbo install, got a call yesterday and it looks like I may be headed for Up State NY for some work (9mo to a year-pipeline). I have a 94 factory turbo and need to know about the down pipe from the turbo. Is it flat or is it round and what size is...

Latest posts

Forum statistics

Threads
91,301
Posts
1,129,945
Members
24,109
Latest member
Lance

Members online

Total: 859 (members: 10, guests: 849)

Share this page

Top